Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Enterprise 500 Color M551 — Trang 29/44

Code: 47.04.XX

Display: 47.04.XX
Description: Print spooler 9100 internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.05.00

Display: 47.05.00
Description: Print spooler framework internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.06.XX

Display: 47.06.XX
Description: Print App internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.FC.00

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Color plane registration (CPR) Image not found at system initialization
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.01

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
CPR Store Image failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.02

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
CPR Image not found
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.03

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
CPR Print engine execution failure
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

Code: 47.FC.10

Display: 47.WX.YZ Printer calibration error To continue, press OK
Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
Consecutive Dmax Dhalf Image not found at system initialization
Remedy: Turn the product off, and then on. If the error persists, reload the firmware.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie