• Code: 11.00.YY
• Display: 11.00.YY Internal clock error
• Description: The product real-time clock has experienced an error. • XX = 01: Clock battery failed • XX = 02: Real-time clock failed
• Remedy: Whenever the product is turned off and then turned on again, set the time and date at the control panel. If the error persists, replace the formatter.

• Code: 20.00.00
• Display: 20.00.00 Insufficient memory: <Device>
• Description: The product has experienced a memory error. You might have tried to transfer too many fonts or macros
• Remedy: Press the OK button to print the transferred data. Some data might be lost. Reduce the page complexity or add product memory.

• Code: 21.00.00
• Display: 21.00.00 Page too complex
• Description: The page decompression process was too slow for the product.
• Remedy: Press the OK button to continue. There may be some data loss.

• Code: 33.WX.YZ
• Display: 33.WX.YZ Used board/disk installed
• Description: An encrypted board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.
• Remedy: • To save the data on the board or disk, turn the product off. Replace the board or disk with another board or disk. • To delete the data on the board or disk and continue, press the OK button.

• Code: 40.00.01
• Display: 40.00.01 USB I/O buffer overflow
• Description: The USB buffer overflowed during a busy state.
• Remedy: 1. Press the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration.

• Code: 40.00.02
• Display: 40.00.02 Embedded I/O buffer overflow
• Description: Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications protocol might be in use.
• Remedy: 1. Press the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration

• Code: 40.00.03
• Display: 40.00.03 EIO <X> buffer overflow
• Description: The product displays this message when the EIO card in the indicated slot has overflowed its I/O buffer during a busy state.
• Remedy: Press the OK button to continue.

• Code: 40.00.04
• Display: 40.00.04 EIO <X> bad transmission
• Description: The product displays this message when a connection with the card in the indicated slot has been abnormally broken.
• Remedy: Press the OK button to continue.