• Code: 59.05.50
• Display: 59.0X.50 Error To continue turn off then on
• Description: A motor startup error has occurred.
  Drum motor (M102) error
• Remedy: 1. If the product has been serviced, check the connector (J187) on the ITB motor and the connector (J87) on the DC controller PCA. 2. Use the drum motor (M102) drive test in the Component test to verify that the motor is properly functioning. If it is not, replace the drum motor.

• Code: 59.A2.02
• Display: 59.A2.0x Error
• Description: A product error has occurred.
  Lifter driver assembly Tray 2 failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 2 paper (PS107 and PS907) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (J73 and J94) on the on the DC controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 2).

• Code: 59.A2.03
• Display: 59.A2.0x Error
• Description: A product error has occurred.
  Lifter driver assembly Tray 3 (1 x 500) failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 3 paper (SR1 and SR2) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (1606 and 1607) on the on the paper feeder controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 3).

• Code: 59.A2.04
• Display: 59.A2.0x Error
• Description: A product error has occurred.
  Lifter driver assembly Tray 4 (3 x 500 with stand) failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 4 paper (SR5 and SR8) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (1604 and 1605) on the on the sheet feeder controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 4).

• Code: 59.A2.05
• Display: 59.A2.0x Error
• Description: A product error has occurred.
  Lifter driver assembly Tray 5 (3 x 500 with stand) failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 5 paper (SR9 and SR12) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (1601 and 1602) on the on the sheet feeder controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 5).

• Code: 60.00.02
• Display: 60.00.0Y Tray <Y> lifting error
• Description: A tray lift motor error has occurred.
  Lifter driver assembly Tray 2 failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 2 paper (PS107 and PS907) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (J73 and J94) on the on the DC controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 2).

• Code: 60.00.03
• Display: 60.00.0Y Tray <Y> lifting error
• Description: A tray lift motor error has occurred.
  Lifter driver assembly Tray 3 failure
• Remedy: 1. Use the Tray/Bin manual sensor test to verify that the Tray 3 paper (SR1 and SR2) surface sensors are properly functioning. 2. If this part has been removed or replace, check the connector (1606 and 1607) on the on the paper feeder controller PCA. 3. If the error persists, replace the lifter drive assembly (Tray 3).

• Code: 62.00.00
• Display: 62.00.00 No system To continue turn off then on
• Description: Internal system failure
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware. If the error still persists, perform a firmware upgrade. If the firmware upgrade does not resolve the problem, replace the hard disk.