• Code: 57.XX.YZ
• Display: 57.XX.YZ Error
• Description:
• Remedy: Use the wiring diagram to trace back where the fan gets its supply voltage. The connectors are supplied in the troubleshooting steps. If after following the steps provided the issue is not resolved it may be a voltage source issue from the DC Controller or LVPS. Depending which FAN is failing one of these parts may need to be replaced as a following step.

• Code: 58.00.02
• Display: 58.00.02 Error
• Description: Environmental sensor (TH3) failure.
• Remedy: 1. Turn the product off and then back on. 2. If this part has been removed or replace, check the connector (J42) on the DC controller PCA. 3. Reconnect the intermediate connector (J199) on the environmental sensor. 4. If the error persists, replace the environmental sensor (TH3).

• Code: 58.00.03
• Display: 58.00.03 Error
• Description: DC controller CPU failure.
• Remedy: 1. Turn the product off and then back on. 2. Check all of the connectors on the DC controller PCA. 3. If the error persists, replace the DC controller PCA.

• Code: 58.00.04
• Display: 58.00.04 Error
• Description: The product experienced a low voltage power supply unit malfunction.
• Remedy: 1. Turn the product off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the product is located has experienced brown outs or is subject to power quality issues. 2. Ensure product is plug into dedicated power outlet. 3. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 58.01.04
• Display: 58.01.04 Error
• Description: 24V power supply error during operation. During regular printing operation the 24V power supply experienced an error.
• Remedy: 1. Turn the product off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the product is located has experienced brown outs or is subject to power quality issues. 2. Ensure product is plug into dedicated power outlet. 3. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 58.02.04
• Display: 58.02.04 Error
• Description: 24V power supply error during boot or wake. During product power on or when waking from sleep mode, the printer experienced an error with the 24V power supply.
• Remedy: 1. Turn the product off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the product is located has experienced brown outs or is subject to power quality issues. 2. Ensure product is plug into dedicated power outlet. 3. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 59.00.00
• Display: 59.00.00 or 59.00.10 Error
• Description: Feed motor (M101) failure (start-up or rotational).
• Remedy: 1. Use the feed motor (M101) drive test in the Component test to verify that the motor is properly functioning. If is not, replace the feed motor (M101). 2. If the product has been serviced, check the connector (J191) on the feed motor and the connector (J91) on the DC controller PCA. 3. Replace the feed motor (M101).

• Code: 59.00.10
• Display: 59.00.00 or 59.00.10 Error
• Description: Feed motor (M101) failure (start-up or rotational).
• Remedy: 1. Use the feed motor (M101) drive test in the Component test to verify that the motor is properly functioning. If is not, replace the feed motor (M101). 2. If the product has been serviced, check the connector (J191) on the feed motor and the connector (J91) on the DC controller PCA. 3. Replace the feed motor (M101).