Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M4555f MFP Enterprise — Trang 16/27

Code: 40.00.01

Display: 40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description: The USB buffer has overflowed.
Remedy: Touch the OK button to print the transferred data (some data might be lost). Check the host configuration.

Code: 40.00.02

Display: 40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description: The product has experienced a JetDirect buffer overflow.
Remedy: Touch the OK button to print the transferred data (some data might be lost). Check the host configuration.

Code: 40.00.03

Display: 40.00.03 EIO <X> buffer overflow To continue, touch “OK”
Description: Too much data was sent to the EIO card in the specified slot (x). An incorrect communications protocol might be in use.
Remedy: Touch the OK button to print the transferred data (some data might be lost).

Code: 40.00.04

Display: 40.00.04 EIO <X> bad transmission To continue, touch “OK”
Description: The connection between the product and the USB device has been broken.
Remedy: Touch the OK button to clear the error message and continue printing. Remove, and then reinstall the USB device.

Code: 40.00.05

Display: 40.00.05 Embedded I/O bad transmission To continue, touch “OK”
Description: The USB device has been removed.
Remedy: Touch the OK button to clear the error message. (Data will be lost.) Install the USB device.

Code: 41.02.00

Display: 41.02.00 Error
Description: A beam detected misprint error.
Remedy: Turn the product off, and then on. If the error persists, replace the laser/scanner assembly.

Code: 41.03.YZ

Display: 41.03.YZ Unexpected size in envelope feeder To use another tray, touch "Options"
Description: The product detected a different paper size than expected. -Y = 0 Size mismatch. Detected media is longer or shorter than expected. -Y = A Size mismatch. Detected media too long. -Y = B Size mismatch. Detected media too short. -Y = C Size mismatch. Inter-page gap error. -Z = D Source is duplexer -Z = E Source is envelope feeder -Z = 2 Source is Tray 2 -Z = 3 Source is Tray 3 -Z = 4 Source is Tray 4 -Z = 5 Source is Tray 5
Remedy: Make sure that the feeder is loaded with the correct paper size and that the sliding paper guides are correctly adjusted. Use the Tray/Bin manual sensor test to verify that the envelope feeder paper sensor (PS1802) is correctly functioning. If the error persists, replace the envelope feeder.

Code: 41.03.YZ

Display: 41.03.YZ Unexpected size in tray <X>
Description: The product detected a different paper size than expected. -Y = 0 Size mismatch. Detected media is longer or shorter than expected. -Y = A Size mismatch. Detected media too long. -Y = B Size mismatch. Detected media too short. -Y = C Size mismatch. Inter-page gap error. -Z = D Source is duplexer -Z = E Source is envelope feeder -Z = 1 Source is Tray 1 -Z = 2 Source is Tray 2 -Z = 3 Source is Tray 3 -Z = 4 Source is Tray 4 -Z = 5 Source is Tray 5
Remedy: Make sure that the tray is loaded with the correct paper size and that the sliding paper guides are correctly adjusted. Use the Tray/Bin manual sensor test to verify that the cassette media switch is correctly functioning. If the error persists, replace the lifter assembly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie