Display: 20.X Insufficient memory To continue touch OK
Description: The device received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
EIO disk
Remedy: Touch OK to print the transferred data (some data might be lost), and then simplify the print job or install additional memory.
Display: 20.X Insufficient memory To continue touch OK
Description: The device received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
USB device or external device
Remedy: Touch OK to print the transferred data (some data might be lost), and then simplify the print job or install additional memory.
Display: 22 USB I/O buffer overflow To continue touch OK
Description: Too much data was sent to the USB buffer.
Remedy: Touch OK to clear the error message. (Data will be lost.) 1. Turn the power off, and then on. 2. Check wire harness connectors. 3. Try sending the print job from a different computer.
Description: Flatbed cover open The scanner flatbed cover is open.
Remedy: 1. If the cover is open, close the cover. 2. If the cover is closed, check the cover sensor at the right rear of the scanner for correct mechancical functionality. 3. Check connector 9 on the scanner control board. 4. Replace the lid sensor assembly or replace the scanner.
Remedy: 1. Turn the device off and then turn the device on. 2. Check the connections between the scanner control board and the formatter. 3. If the message persists, replace the scanner control board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.