Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M551dn Enterprise 500 — Trang 40/44

Code: 98.00.02

Display: 98.00.02 Corrupt data in solutions volumeRf
Description: Data corruption has occurred in the solutions volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.

Code: 98.00.03

Display: 98.00.03 Corrupt data in configuration volume
Description: Data corruption has occurred in the configuration volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware

Code: 98.00.04

Display: 98.00.04 Corrupt data in job data volume
Description: Data corruption has occurred in the job data volume
Remedy: Turn the product off, and then on. Rerun the file erase function.

Code: 99.00.01

Display: 99.00.01 Upgrade not performed file is corrupt
Description: A remote firmware upgrade (RFU) was not performed. CRC error in the firmware image (bad image).
Remedy: Download the RFU file and attempt the upgrade again.

Code: 99.00.02

Display: 99.00.02 Upgrade not performed timeout during receive
Description: A remote firmware upgrade (RFU) was not performed. I/O timeout when reading header number and size. Indicates a problem with the network environment, not the device.
Remedy: The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.

Code: 99.00.03

Display: 99.00.03 Upgrade not performed error writing to disk
Description: A remote firmware upgrade (RFU) was not performed. Disk error. May indicate a problem or a hard disk failure. It might be necessary to check the connection to the hard disk or replace the hard disk.
Remedy: 1. Download the RFU file and attempt the upgrade again. 2. If the error persists, perform the Clean Disk process. You will then need to download firmware from the Preboot menu. 3. If the error persists, replace the hard disk.

Code: 99.00.04

Display: 99.00.04 Upgrade not performed timeout during receive
Description: A remote firmware upgrade (RFU) was not performed. I/O timeout when reading rest of header.
Remedy: The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.

Code: 99.00.05

Display: 99.00.05 Upgrade not performed timeout during receive
Description: A remote firmware upgrade (RFU) was not performed. I/O timeout when reading image data.
Remedy: The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie