Code :

Code: 33.01.XX
Display: 33.01.XX
Description: • 33.01.01 (event code) A restore process has occurred. • 33.01.02 (event code) A save process has occurred. • 33.01.03 (event code) Save recover functionality OK after previously being disabled.
Remedy: No action necessary.

Code: 33.02.01
Display: 33.02.01 Used board/disk installed
Description: Used board disk installed. An encrypted board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.
Remedy: 1. Reinstall the used board or disk back into its original product. 2. To save the data on the board or disk, turn the product off. replace the board or disk with another board or disk. 3. To delete the data on the board or disk and continue, touch the OK button.

Code: 33.03.03
Display: 33.03.03 Incompatible formater installed.
Description: This is and EFI BIOS event to prevent booting with the wrong formatter installed.
Remedy: Turn the product off, and then install the correct formatter in the product. NOTE: If it is believed that this formatter is the correct part number and model for this product, install a replacement formatter, and then return the formatter in question to HP for evaluation.

Code: 33.03.XX
Display: 33.03.XX
Description: • 33.02.01 (event code) Save recover engine storage ID unexpected length. • 33.03.02 (event code) Data size mismatch unable to recover DCC MVRAM.
Remedy: Turn the product off, and then on again. If the error persists, replace the image control board (ICB) and return to HP for evaluation.

Code: 40.00.01
Display: 40.00.01 USB I/O buffer overflow
Description: The USB buffer has overflowed.
Remedy: 1. Touch the OK button to print the transferred date (some data might be lost). 2. Check the host configuration.

Code: 40.00.02
Display: 40.00.02 Embedded I/O buffer overflow
Description: The product has experienced a JetDirect buffer overflow.
Remedy: 1. Touch the OK button to print the transferred date (some data might be lost). 2. Check the host configuration.

Code: 40.00.03
Display: 40.00.03 EIO <X> buffer overflow
Description: Too much data was sent to the EIO card in the specified slot (x). An incorrect communications protocol might be in use.
Remedy: Touch the OK button to print the transferred date (some data might be lost).

Code: 40.00.04
Display: 40.00.04 EIO <X> bad transmission
Description: The connection between the product and the USB device has been broken.
Remedy: 1. Touch the OK button to clear the error message and continue printing. 2. Remove, and then reinstall the USB device.