Remedy: 1. Turn the product off, and then on again. 2. Check the connections on the scanner control board (SCB). 3. Replace the scanner control board (SCB).
Description: The formatter lost connections with the scanner control board (SCB) or communication was corrupted.
Remedy: 1. Turn the product off, and then on. 2. Remove and then re-seat the formatter. 3. Upgrade the firmware. 4. Verify that all cables are connected to the product and to the interconnect board, and scanner control board (SCB). 5. Verify that the scanner control board (SCB) has power. 6. Replace the scanner control board (SCB). 7. Replace the formatter.
Description: Internal product communication error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then check the scanner control board (SCB) connectors. 3. If this error occurs after a formatter, fax card or hard disk has been replaced, check that the formatter is fully seated and the connectivity LED (smile face icon on the formatter) is illuminated. Check the fax card for proper seating on the formatter. (If fax card is not properly seated it can prevent the formatter from seating properly in the product.. 4. If the error persists, replace the scanner control board (SCB).
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then re-seat the formatter. 3. If the error persists, replace the formatter.
Description: Copy processor board (CPB) / Scanner control board (SCB) communication error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then check the scanner cable. 3. Upgrade the firmware. 4. If the error persists, turn the product off, and then re-seat the formatter. 5. If the error persists, replace the scanner control board (SCB) or the formatter.
Description: Internal Copy processor board (CPB) communication error. CPB code assertion error for the copy processor board firmware.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then remove and then re-seat the formatter. 3. Upgrade the firmware. 4. If the error persists, replace the scanner control board (SCB). 5. If the error persists, replace the formatter.
Description: The firmware cannot find the copy processor board.
Remedy: 1. Turn the product off, and then on again. 2. f the error persists, turn the product off, and then remove and then re-seat the formatter. 3. If the error persists, replace the scanner control board (SCB).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.