Code :

Code: 30.01.32
Display: 30.01.30 or 30.01.32
Description: HP image ASIC error.
Remedy: 1. Turn the product off, and then on again. 2. Check the connections on the scanner control board (SCB). 3. Replace the scanner control board (SCB).

Code: 30.01.36
Display: 30.01.36 Upgrade Error try downloading upgrade again
Description: Scanner firmware upgrade error.
Remedy: 1. Re-send the scanner firmware upgrade. 2. If the error persists, replace the scanner control board (SCB).

Code: 30.01.41
Display: 30.01.41 Scanner error
Description: The formatter lost connections with the scanner control board (SCB) or communication was corrupted.
Remedy: 1. Turn the product off, and then on. 2. Remove and then re-seat the formatter. 3. Upgrade the firmware. 4. Verify that all cables are connected to the product and to the interconnect board, and scanner control board (SCB). 5. Verify that the scanner control board (SCB) has power. 6. Replace the scanner control board (SCB). 7. Replace the formatter.

Code: 30.01.42
Display: 30.01.42 Scanner error
Description: Internal product communication error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then check the scanner control board (SCB) connectors. 3. If this error occurs after a formatter, fax card or hard disk has been replaced, check that the formatter is fully seated and the connectivity LED (smile face icon on the formatter) is illuminated. Check the fax card for proper seating on the formatter. (If fax card is not properly seated it can prevent the formatter from seating properly in the product.. 4. If the error persists, replace the scanner control board (SCB).

Code: 30.01.43
Display: 30.01.43 Scanner memory failure
Description: Scan memory error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then re-seat the formatter. 3. If the error persists, replace the formatter.

Code: 30.01.44
Display: 30.01.44
Description: Copy processor board (CPB) / Scanner control board (SCB) communication error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then check the scanner cable. 3. Upgrade the firmware. 4. If the error persists, turn the product off, and then re-seat the formatter. 5. If the error persists, replace the scanner control board (SCB) or the formatter.

Code: 30.01.45
Display: 30.01.45
Description: Internal Copy processor board (CPB) communication error. CPB code assertion error for the copy processor board firmware.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then remove and then re-seat the formatter. 3. Upgrade the firmware. 4. If the error persists, replace the scanner control board (SCB). 5. If the error persists, replace the formatter.

Code: 30.01.46
Display: 30.01.46 Scanner Error
Description: The firmware cannot find the copy processor board.
Remedy: 1. Turn the product off, and then on again. 2. f the error persists, turn the product off, and then remove and then re-seat the formatter. 3. If the error persists, replace the scanner control board (SCB).