• Code: 66.80.33
• Display: 66.80.33 Output accessory failure To continue turn off then on
• Description: Output roller lift motor could not reach home.
• Remedy: 1. Turn the power off. 2. Make sure that the external paper handling accessory is clear of all packing materials and other obstructions. 3. Turn the power on. 4. If the error persists, replace the stapler/stacker alignment assembly.

• Code: 69.11.YY
• Display: 69.11.YY Error To continue, touch “OK”
• Description: This message displays to indicate an error during a duplex operation.
• Remedy: Turn the product off and then on.

• Code: 70.00.00
• Display: 70.00.00 Error To continue turn off then on
• Description: The product experienced a DC controller failure.
• Remedy: 1. Turn the product off and then on. 2. If the error persists, replace the DC controller.

• Code: 80.0X.YY
• Display: 80.0X.YY Embedded Jetdirect Error
• Description: Embedded HP JetDirect print server critical error.• 80.01.80 No heartbeat • 80.01.81 Reclaim time-out • 80.01.82 Invalid data length • 80.01.8B Invalid max outstanding packet header field • 80.01.8C Invalid channel mapping response • 80.03.01 No PGP buffers • 80.03.02 Channel table full • 80.03.03 Producer index not reset • 80.03.04 Consumer index not reset • 80.03.05 Queue position size too small • 80.03.06 Transport overflow • 80.03.07 No overflow packetsm • 80.03.08 Invalid identify response • 80.03.09 Invalid channel map return status • 80.03.10 Invalid reclaim return status • 80.03.12 Datagram invalid buffer • 80.03.13 Max stream channels • 80.03.14 Max datagram channels • 80.03.15 Card reset failed • 80.03.16 Self test failure • 80.03.17 Unknown PGP packet • 80.03.18 Duplicate I/O channel
• Remedy: Turn the product off, and then on. If the error persists, replace the formatter.

• Code: 81.WX.00
• Display: 81.WX.00 Wireless Network Error To continue turn off then on
• Description: A wireless network component on the product has failed.
• Remedy: 1. Turn the product off, and then on. 2. If the error persists, turn the product off, reseat the wireless network component, and then turn the product on. 3. If the error persists, replace the wireless network component.

• Code: 81.WX.YZ
• Display: 81.WX.YZ Embedded JetDirect Error To continue turn off then on
• Description: • 81.01.00: EIO Networking Event <UVWXYZ> • 81.02.00: Wireless Networking Event <UVWXYZ> • 81.03.00: Access Point Wireless Networking Event <UVWXYZ> • 81.04.00: Jetdirect Inside Networking Event <UVWXYZ> • 81.06.00: Internal EIO Networking Event <UVWXYZ> • 81.07.00: Internal Wireless Networking Event <UVWXYZ> • 81.08.00: Internal Access Point Wireless Networking Event <UVWXYZ> • 81.09.00: Internal Jetdirect Inside Networking Event <UVWXYZ>
• Remedy: 1. Turn the product off and then on. 2. Turn the product off, reseat the EIO accessory, and then turn the product on. 3. If the error persists, replace the formatter.

• Code: 81.YY.YY
• Display: 81.YY.YY EIO Error To continue turn off then on
• Description: An external I/O card has failed on the product.
• Remedy: 1. Turn the product off and then on. 2. Turn the product off, reseat the EIO accessory, and then turn the product on. 3. If the error persists, replace the EIO card.

• Code: 98.00.01
• Display: 98.00.01
• Description:
• Remedy: 1. Turn the product off and then on. 2. Use the 1 Clear disk item in the Preboot menu. 3. Reload the firmware.