Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M750n Color Enterprise — Trang 46/47

Code: 99.09.60

Display: 99.09.60 Unsupported disk
Description: Preboot menu error. The hard disk currently installed is not recognized or supported by the product.
Remedy: Install the correct hard disk for this product.

Code: 99.09.61

Display: 99.09.61 Unsupported disk
Description: Preboot menu error. The installed disk is installed in a product configured for a encrypted hard disk.
Remedy: Open the Preboot menu, and then select Lock Disk to lock the disk.

Code: 99.09.62

Display: 99.09.62 Unknown disk
Description: Preboot menu error. The installed disk was previously locked in another product.
Remedy: Install a new disk or use the Preboot menu to unlock this disk. If the disk is to be reused in a different product, execute the Clean Disk procedure from the Preboot menu, and then reload firmware and lock the disk.

Code: 99.09.63

Display: 99.09.63 Incorrect disk
Description: A new or blank disk has been installed in a device which previously had an encrypted disk.
Remedy: Follow the procedure to load firmware on a new hard disk, and then lock it to this product.

Code: 99.09.64

Display: 99.09.64 Disk malfunction
Description: A fatal hard disk failure has occurred.
Remedy: Replace the hard disk drive.

Code: 99.09.65

Display: 99.09.65 Disk data error
Description: Disk data corruption has occurred.
Remedy: Execute the Clean Disk procedure from the Preboot menu, and then resend the RFU.

Code: 99.09.66

Display: 99.09.66 No disk installed
Description: A disk drive is not installed in the product.
Remedy: 1. Install a compatible hard disk drive. 2. If a compatible hard disk is installed, reseat the hard disk to make sure it is correctly connected. 3. If the error persists, replace the hard disk drive.

Code: 99.09.67

Display: 99.09.67 Disk is not bootable please download firmware
Description: The product has a non-secure disk (solid state disk) installed as the boot disk, and it has been replaced with a new service part. A new firmware image needs to be downloaded to the device.
Remedy: 1. Press any button to continue to the main Preboot menu. 2. Press the Help button to see the help text for the error. 3. Select the Administration menu. NOTE: If there is a password assigned to the Administrator, a prompt to enter the password displays. 4. Select the Download item. 5. The user can now download a new firmware bundle to the product.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie