Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M9059 MFP — Trang 4/16

Code: 13.11.08

Display: 13.11.08 Jam in input accessory
Description: A paper delivery jam is in the vertical transfer unit registration area.
Remedy: - Clear the jam in the area indicated. - Close the door to allow the product to attempt to clear the jam. - Check the function of the vertical transfer sensor. - Replace the vertical transfer sensor. - Replace the vertical transfer unit.

Code: 13.11.09

Display: 13.11.09 Jam in input accessory
Description: A paper-delivery stationary jam is in the right door area.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Check the function of the vertical transfer sensor. - Replace the paper path connection unit. - Replace the vertical registration assembly. - Replace the diverter.

Code: 13.11.0A

Display: 13.11.0A Jam in input device
Description: A jam occurs in the input device as the product is turned on.
Remedy: - Clear the jam. - Turn the product off, and then on.

Code: 13.11.10

Display: 13.11.10 Residual jam in delivery area
Description: A jam occurs in the delivery area when the product is turned on or as the front door is closed.
Remedy: - Clear the jam. - Turn the product off, and then on. - Replace the paper path connection unit. - Replace the VRA.

Code: 13.12.XX

Display: 13.12.<XX> Jam in finishing device
Description: finishing device (depending on the finishing device model). 11, 30–31 is a jam in the stapler. 21–23 or 01–05 is a jam in the flipper area. 20–25 is a jam in the accumulator area (stacker/stapler). 31–33 or 10–13 is a jam in the paper path. 34 is a ejectors jam. 40–42 is jam in the offset area (stacker). 41–43 is a jam in the folding area (multifunction finisher). 51–53 is a jam in the booklet area (multifunction finisher). 50–54 is a jam in the exit area (multi-bin mailbox)
Remedy: - Follow instructions in online help. - Remove the jam from the finisher area. - Remove, realign, and reinstall the finishing device. - Turn the product off and turn it on. If the error continues, look for more jammed material. - See the Output finishing device service manual (Q5693.90002) for more detailed instructions.

Code: 13.13.00

Display: 13.13.00 Jam inside duplexer door
Description: A jam is in the duplexer area. The trailing edge of the media did not leave the duplexer paper sensor (PS2004) within a specified time.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the duplexer.

Code: 13.13.00

Display: 13.13.00 Jam inside left door
Description: A jam is in the duplexer area. The trailing edge of the media did not leave the duplexer paper sensor (PS2004) within a specified time.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the duplexer.

Code: 13.20.00

Display: 13.20.00 Jam inside front door
Description: A jam is in the paper path. Media is detected inside the product. NOTE: The media was detected as the product was turned on or as any door was open and closed. Media might be detected by the following sensors: - Registration sensor (PS2) - Fusing-unit jam sensor (PS501) - Fusing-unit delivery sensor (PS502) - Tray 2 paper-feed sensor (PS1402) - Tray 3 paper-feed sensor (PS1403) - Face-down-bin delivery sensor (PS1451) - The duplexer residual paper sensor (PS2005)
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Check the seating of the leaf springs under the high voltage power supply. - Remove the duplexer and check for media in the paper path. - Check the function of the duplexer residual paper sensor. - Replace the fuser.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie