Description: A jam is in the paper path. Media is detected inside the product. NOTE: The media was detected as the product was turned on or as any door was open and closed. Media might be detected by the following sensors: - Registration sensor (PS2) - Fusing-unit jam sensor (PS501) - Fusing-unit delivery sensor (PS502) - Tray 2 paper-feed sensor (PS1402) - Tray 3 paper-feed sensor (PS1403) - Face-down-bin delivery sensor (PS1451) - The duplexer residual paper sensor (PS2005)
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Check the seating of the leaf springs under the high voltage power supply. - Replace the fuser.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Run a service test. - Check the function of the interlock switches. - Replace the front door.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Run a service test. - Check the function of the interlock switches. - Replace the left door.
Remedy: Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a service test. - Replace the paper input unit. - Replace the Tray 1 pickup rollers. - Replace Tray 1.
Description: A jam is in the pickup area of Tray 1.
Remedy: Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a service test. - Replace the paper input unit. - Replace the Tray 1 pickup rollers. - Replace Tray 1.
Description: A jam is in the fuser area. The leading edge of the media reached the fuser delivery sensor (PS502) within the specified time, but the trailing edge of the media failed to reach the fuser-jam sensor (PS501) within the specified time.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the fuser.
Description: A jam is in the fuser area. The leading edge of the media reached the fuser delivery sensor (PS502) within the expected time, but the trailing edge of the media failed to reach the fuser-jam sensor (PS501) within the expected time.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the fuser.
Description: A jam is in the feed area. The media failed to leave the registration sensor (PS2) within the expected time.
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Replace the registration assembly. - Replace the paper-input unit.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.