Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet P3005dn — Trang 4/8

Code: 13.XX.XX

Display: 13.XX.YY JAM INSIDE REAR DOOR
Description: A jam has occurred in the duplex reversing area.
Remedy: 1. Press "down" to see step-by-step information. 2. Open the rear door, and then remove all media found. 3. Close the rear door. 4. Open and close the cartridge door to clear the error message.

Code: 13.XX.XX

Display: 13.XX.YY JAM INSIDE TOP COVER
Description: A jam has occurred in the registration assembly area.
Remedy: 1. Press "down" the to see step-by-step information. 2. Open the cartridge door, and then remove the print cartridge. 3. Remove all media found. 4. Lift the metal flap, and then remove any media remaining. 5. Reinstall the print cartridge, and then close the cartridge door. 6. If the message persists, verify that the flat ribbon cable at the bottom of the ECU is connected correctly. 7. To exit, press ?

Code: 20

Display: 20-INSUFFICIENT MEMORY
Description: The device has received more data from the computer than fits in available memory.
Remedy: 1. Press "OK" to continue printing. 2. Reduce the complexity of the print job to avoid this error. 3. Adding memory to the device may allow printing of more complex pages.

Code: 21

Display: 21 PAGE TOO COMPLEX
Description: The page-compression process is too slow for the device. Some data may be lost on the page.
Remedy: 1. Press "down" to see step-by-step information. 2. To print the job with some data loss, press " OK" to exit the message, and then press . If data is lost, simplify the page content to reduce its complexity. 3. To exit, press ?

Code: 22

Display: 22-EIO X BUFFER OVERFLOW
Description: For devices with an EIO device only. The device EIO card in slot X has overflowed its I/O buffer during a busy state.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 22

Display: 22-EMBEDDED I/O BUFFER OVERFLOW
Description: The embedded HP Jetdirect print server buffer has overflowed during a busy state.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 22

Display: 22-PARALLEL I/O BUFFER OVERFLOW
Description: The device parallel buffer has overflowed during a busy state.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 22

Display: 22-SERIAL I/O BUFFER OVERFLOW
Description: The device serial buffer has overflowed during a busy state.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie