Description: A jam has occurred in the specified location.
Remedy: Remove jammed paper from the specified location. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider.
Description: A jam has occurred in the specified location.
Remedy: Remove jammed paper from the specified location. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider.
Remedy: 1. Open the top cover. 2. Remove the print cartridge and any paper. 3. Reinstall the print cartridge and close the top cover. 4. Close all trays.
Description: The data (dense text, rules, raster or vector graphics) sent to the product was too complex.
Remedy: • Press OK to print the transferred data (some data might be lost). • If this message appears often, simplify the print job or install additional memory.
Description: Too much data was sent to the EIO card in the specified slot [X]. An improper communications protocol might be in use. Note: EIO 0 is reserved for the HP Jetdirect embedded print server
Remedy: • Press OK to clear the message. (The job will not be printed.) • Check the host configuration. If the message persists, contact an HPauthorized service or support provider.