Code :

Code: 68.X
Display: 68.X STORAGE ERROR SETTINGS CHANGED
Description: An error occurred in the product permanent storage and one or more product settings has been reset to its factory default.
Remedy: Press OK to resume printing. Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider.

Code: 69.X
Display: 69.X ERROR
Description: A printing error occurred.
Remedy: • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider.

Code: 79.XXXX
Display: 79.XXXX ERROR
Description: The product detected a critical hardware error.
Remedy: • Press the stop button to clear the print job from the product memory. Turn the product off and then on. • Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance. If the message persists with different programs and print jobs, try these steps. • Turn the product off. • Disconnect all cables to the product that connect it to the network or computer. • Remove all the memory DIMMs or thirdparty DIMMs from the product. Then reinstall the memory DIMM. • Remove the EIO device from the product. • Turn the product on. If the error no longer exists, follow these steps. • Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. • Replace the DIMM or EIO device if you determine that it causes the error. • Reconnect all cables that connect the product to the network or computer.

Code: 8X.YYYY
Display: 8X.YYYY EIO ERROR
Description: The EIO accessory card in slot [X] has encountered a critical error
Remedy: • Turn the product off and then on. • Turn the product off, reseat the EIO accessory in slot [X], and then turn the product on. • Turn the product off, remove the EIO accessory from slot [X], install it in a different EIO slot, and then turn the product on. • Replace the EIO accessory in slot [X].

Code: 8X.YYYY
Display: 8X.YYYY EMBEDDED JETDIRECT ERROR
Description: The embedded HP Jetdirect print server has encountered a critical error.
Remedy: • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider.