Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Latex 300 — Trang 20/32

Code: 27.1:00

Description: Several nozzles out detected in Optimizer PH
Causes: Several nozzles out detected in Optimizer PH: If print quality is not acceptable replace the PH.
Remedy: Service engineer: • Check the IQ. If required, recover or replace the PH.

Code: 27.1:01

Description: Error due to a high number of nozzles out in printhead slot 1
Causes: High number of nozzles out in printhead slot 1.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27.2:01

Description: Error due to a high number of nozzles out in printhead slot 2
Causes: High number of nozzles out in printhead slot 2.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27.3:01

Description: Error due to a high number of nozzles out in printhead slot 3
Causes: High number of nozzles out in printhead slot 3.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27.4:01

Description: Error due to a high number of nozzles out in printhead slot 4
Causes: High number of nozzles out in printhead slot 4.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27.5:01

Description: Error due to a high number of nozzles out in printhead slot 5
Causes: High number of nozzles out in printhead slot 5.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27.6:01

Description: Error due to a high number of nozzles out in printhead slot 6
Causes: High number of nozzles out in printhead slot 6.
Remedy: Service engineer: 1. Clean all the printheads and check their status. 2. Replace the printhead.

Code: 27:14

Description: An incorrect Printhead has been detected.
Causes: Printhead failure.
Remedy: Call agent: 1. Remove the Printheads and check that they are the correct ones for this Printer. 2. Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. 3. Replace the Printheads.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie