Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP OfficeJet Pro X451 — Trang 5/8

Code: 61000017

Description: Printbar transmission state error
Remedy: Turn the product off, then on. Ensure that the service sled transmission is in the correct position.

Code: 6100001E

Description: Paper motor thermal error
Remedy: Turn the product off, then on. Check that there is no debris in the paper path or print zone that could be causing drag on the motor. The paper motor is not field replaceable.

Code: 6100001F

Description: Duplex motor thermal error
Remedy: Turn the product off, then on. Check that there is no debris in the lower paper path (below the duplex module) that could be causing drag on the motor. Replace the duplex motor.

Code: 61000020

Description: Output motor thermal error
Remedy: Turn the product off, then on. Check that there is no debris in the upper paper path that could be causing drag on the motor. Check that all portions of the output drive rotate freely. Replace the output drive assembly.

Code: 6100002D

Description: Paper load tray 1 pick motor
Remedy: Turn the product off, then on. Verify that the pick tire moved. If it moved, the top of the page in the tray will move about an inch. Verify that the service/pick transmission is in the correct position. Check for a missing wavy spring in lower swing arm. NOTE: The Tray 1 pick tire/index sensor is not field replaceable.

Code: 6100002E

Description: Paper load pick tire index sensor
Remedy: Turn the product off, then on. Verify that the pick tire moved. If it moved, the top of the page in the tray will move about an inch. Verify that the service/pick transmission is in the correct position. Check for a missing wavy spring in lower swing arm. NOTE: The Tray 1 pick tire/index sensor is not field replaceable.

Code: 61000035

Description: Printbar clutch slippage
Remedy: Turn the product off, then on. Check for any objects obstructing printbar motion. Check that there is no debris on the printbar lift guide rods. Check the printbar lift shaft. Replace it if it is defective.

Code: 6100004E

Description: Pen startup spits already done
Remedy: Turn the product off, then on. Replace the printbar.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie