• Code: 0xC6FDxx10
• Description: Pen bad DSTR
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx11
• Description: Pen bad DSTR
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx12
• Description: Pen TSR fault
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx13
• Description: Pen stuck, cold
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx14
• Description: Pen not heating
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx15
• Description: Pen too cold
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

• Code: 0xC6FDxx15
• Description: Pen too cold
• Remedy: Wait for the printhead to warm up. This can take up to four hours. Replace the printbar.

• Code: 0xC714xx20
• Description: Pen VDD short low
• Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).