Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi KIP 7000 — Trang 2/2

Code: E-21

Description: Fuser Thermostat Error
Causes: 1. When the Thermostat is cut off. 2. When Interlock Signal (INTLK1) changes to H

Code: E-23

Description: LED Head Cleaning Error
Causes: The LED Head Cleaning Motor Over Current Signal (CLMTR_OC) remains H for more than 90 seconds during LED Head cleaning.

Code: E-40

Description: Folder Error
Causes: 1. When Error is received while Folder is connected. 2. When the Door of the Folder is opened, or Folder is jammed.

Code: E-41

Description: Key Card Error
Causes: When Key Card is not inserted while Key Card is set.

Code: E-51

Description: High Voltage Power Source Error
Causes: When output detection signal from HVP detects abnormal condition. Refer to page 7-31 for the detail.

Code: J-21

Description: Optional Device Delay Jam (ex. Stacker)
Causes: After the Paper reached to the Exit Sensor, when “paper existence signal” is not received from Optional Device within the specified time.

Code: J-22

Description: Optional Device Stay Jam (ex. Stacker)
Causes: After the Paper left the Exit Sensor, when “paper notexistence signal” is not received from Optional Device within the specified time.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie