Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 164 — Trang 3/3

Code: CC151

Description: Flash ROM error
- The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware.
- When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display.
- If this error message appears, no operations can then be performed. It is not possible to upgrade the firmware from a PC connected through USB connection, either.
Remedy: 1 Check the PRCB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Unplug EEPROM (R22) from PRCB and then plug it back in. 5 Change PRCB.

Code: CC153

Description: Engine flash ROM error
- Data of flash ROM of the engine control system is determined to be faulty.
Remedy: 1 Check the PRCB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Unplug EEPROM (R22) from PRCB and then plug it back in. 5 Change PRCB.

Code: CC163

Description: Engine connection failure
- The controller can not communicate with the engine control system
Remedy: 1 Turn OFF and ON the power switch. 2 Check the PRCB connectors for proper connection and correct as necessary. 3 Change PRCB.

Code: CD301

Description: EEPROM error
- Contact the responsible people of KMBT before taking some countermeasures.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie