Danh mục sản phẩm

Code :

Code: R.3.4
Description: DCN was received after FTT. Communication was not possible at 2400 bps. Poor phone line conditions prevented fax communication. Enable the Eye Quality Check on memory Switch 31 and 32.
Remedy:

Code: R.4.1
Description: The machine received too large length data that over your machine’s limit.
Remedy:

Code: R.4.2
Description: MPS/EOM/EOP was not received. Either the line disconnected before reception was completed or too many errors were detected by the receiving unit. Adjust the data error rate on Memory Switch 20. It may also be necessary to decrease the receive communication speed via Memory Switch 20.
Remedy:

Code: R.4.4
Description: The receiving fax machine has reached its memory capacity.
Remedy:

Code: R.5.1
Description: DCN was received instead of RR during ECM communication.
Remedy:

Code: R.5.2
Description: Line noise or other problems prevented ECM reception.
Remedy:

Code: R.8.1
Description: A compatibility error occurred.
Remedy:

Code: R.8.10
Description: Line noise or other problems prevented line probing.
Remedy:

< 1 2 3 4 5 >

0