Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 190f — Trang 2/5

Code: D.0.3, D.0.8

Description: The remote unit didn’t respond, the call couldn’t be completed or stop was pressed uring dialing. Retry the call. If your machine repeats the message, call the remote fax unit’s operator and verify that unit is operating properly.
Remedy:

Code: D.0.6, D.0.7

Description: Either the remote unit didn’t respond, the call somehow didn’t go through or STOP was pressed during dialing. Try the call again.
Remedy:

Code: R.1.1

Description: T1 time-out. The calling unit was not a fax machine or the transmitting unit is having difficulties.
Remedy:

Code: R.1.2

Description: The two fax machines were incompatible. Your machine sends and receives only ITU-T
Group 3 fax communication, the industry standard since the early 1980s.
Remedy:

Code: R.1.4

Description: Someone pressed <Stop> during fax reception.
Remedy:

Code: R.2.3

Description: Poor phone line conditions made fax communication impossible. Enable the one second pause after CED on Memory Switch 20. Also try increasing the echo wait time on Memory Switch 21 if echo is on the line
Remedy:

Code: R.3.1

Description: No response to CFR. DCN was received from the transmitter. Poor line conditions made communication impossible. Adjust the echo wait time on Memory Switch 21. Try
increasing the output levels via Memory Switch 11.
Remedy:

Code: R.3.3

Description: Too many errors were detected during data reception. The carrier was interrupted. Increase the data error rate on Memory Switch 20.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie