Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 282 — Trang 7/8

Code: C5352

Description: Cooling Fan Motor Failure
- The Cooling Fan Motor Lock signal remains set to H for a set period of time while the Cooling Fan Motor is turning.
- The Cooling Fan Motor Lock signal remains set to L for a set period of time while the Cooling Fan Motor remains stopped
Remedy: 1 Check the M5 connectors for proper connection, and correct as necessary. 2 Check the fan for possible overload, and correct as necessary. 3 M5 operation check. 4 Change PWB-A.

Code: C5353

Description: IU Cooling Fan Motor Failure
- The IU Cooling Fan Motor Lock signal remains set to H for a set period of time while the IU Cooling Fan Motor is turning.
- The IU Cooling Fan Motor Lock signal remains set to L for a set period of time while the IU Cooling Fan Motor remains stopped.
Remedy: 1 Check the M6 connectors for proper connection, and correct as necessary. 2 Check the fan for possible overload, and correct as necessary. 3 M6 operation check. 4 Change PWB-A.

Code: C7001

Description: Engine connection error
- The system fails in checking initial engine connection when the Power Switch is turned ON.
- The system succeeded in checking initial connection when the Power Switch was turned ON; then it fails in rechecking initial connection through the execution of a software reset when a communications error occurs during operation.
Remedy: 1 Check the connection between Mechanical Control Board and BCRS Board. 2 Reset the malfunction and turn OFF and ON the Power Switch. 3 Change BCRS. 4 Change PWB-A.

Code: C8301

Description: ADF Fan Motor Failure
- See DF-620 service manual.
Remedy:

Code: C9701

Description: ADF Document Size Failure Adjustment
- See DF-620 service manual.
Remedy:

Code: CA052

Description: MIO Device Failure
- The MIO device does not operate properly
Remedy: 1 Turn OFF the Main Power Switch, wait for 10 sec. or more, and turn ON the Main Power Switch. 2 Check the BCRS connectors for proper connection, and correct as necessary. 3 Change BCRS.

Code: CC153

Description: Flash ROM Failure
- The Flash ROM data was determined to be faulty when the unit was turned on.
Remedy: 1 Turn OFF the Main Power Switch, wait for 10 sec. or more, and turn ON the Main Power Switch. 2 The firmware data is overwritten. 3 Change PWB-A.

Code: CC155

Description: Exit Option Flash ROM Failure
- See FS-530/PU-501/OT-602 service manual.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie