Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 3320 — Trang 16/22

Code: 948.xx

Description: Failed controller board - pel clock check failed. Replace the controller board.
Remedy: Replace the controller board

Code: 949.xx

Description: Failed controller board - delay line calibration failure.
Remedy: Replace the controller board

Code: 950.xx

Description: NVRAM mismatch failure - mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29 - mismatch between system and mirror • 30-60 - mismatch between secure and system
Remedy:

Code: 952.xx

Description: A recoverable NVRAM Cyclic Redundancy Check (CRC) error occurred - n is the offset at which the error occurred.
Remedy:

Code: 953.xx

Description: NVRAM chip failure with mirror part. Replace the controller board.
Remedy: Replace the controller board

Code: 954.xx

Description: NVRAM chip failure with system part. Replace the controller board.
Remedy: Replace the controller board

Code: 955.xx

Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectible multi-bit failure. Replace the controller board.
Remedy: Replace the controller board

Code: 956.01

Description: Processor Overtemp. Replace the controller board.
Remedy: Replace the controller board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie