Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 3320 — Trang 15/22

Code: 843.05

Description: Carriage overun
Remedy: Step 1: Check all cables connecting the ADF and flatbed to the controller board. Are they properly connected? Yes: Go to step 3. No: Go to step 2.
Step 2: Re-connect the cables to the controller board. Did this fix the problem? Yes: The problem is solved. No: Go to step 3.
Step 3: 1. Enter diagnostics mode and navigate to: SCANNER TESTS >Sensor Test Perform the scanner sensor tests. 2. Navigate to: SCANNER TESTS >Motor Tests Perform the scanner sensor and motor tests. Did any test fail? Yes: Go to step 4. No: Go to step 8.
Step 4: Did the Flatbed Home Sensor test or Flatbed motor test fail? Yes: Go step 5. No: Go to step 6.
Step 5: Replace the flatbed. Did this solve the problem? Yes: The problem is solved. No: Go to step 6.
Step 6: Did the ADF pick motor or feed motor tests fail? Yes: Go to step 7. No: Go to step 8.
Step 7: Replace the ADF. Did this fix the problem? Yes: The problem is solved. No: Go to step 8.
Step 8: Replace the controller board. Did this fix the problem? Yes: The problem is solved. No: Contact the next level of support.

Code: 843.06

Description: ADF nudger
Remedy: Step 1: Check all cables connecting the ADF and flatbed to the controller board. Are they properly connected? Yes: Go to step 3. No: Go to step 2.
Step 2: Re-connect the cables to the controller board. Did this fix the problem? Yes: The problem is solved. No: Go to step 3.
Step 3: 1. Enter diagnostics mode and navigate to: SCANNER TESTS >Sensor Test Perform the scanner sensor tests. 2. Navigate to: SCANNER TESTS >Motor Tests Perform the scanner sensor and motor tests. Did any test fail? Yes: Go to step 4. No: Go to step 8.
Step 4: Did the Flatbed Home Sensor test or Flatbed motor test fail? Yes: Go step 5. No: Go to step 6.
Step 5: Replace the flatbed. Did this solve the problem? Yes: The problem is solved. No: Go to step 6.
Step 6: Did the ADF pick motor or feed motor tests fail? Yes: Go to step 7. No: Go to step 8.
Step 7: Replace the ADF. Did this fix the problem? Yes: The problem is solved. No: Go to step 8.
Step 8: Replace the controller board. Did this fix the problem? Yes: The problem is solved. No: Contact the next level of support.

Code: 843.99

Description: Scanner complete timeout error
Remedy: Step 1: Check all cables connecting the ADF and flatbed to the controller board. Are they properly connected? Yes: Go to step 3. No: Go to step 2.
Step 2: Re-connect the cables to the controller board. Did this fix the problem? Yes: The problem is solved. No: Go to step 3.
Step 3: 1. Enter diagnostics mode and navigate to: SCANNER TESTS >Sensor Test Perform the scanner sensor tests. 2. Navigate to: SCANNER TESTS >Motor Tests Perform the scanner sensor and motor tests. Did any test fail? Yes: Go to step 4. No: Go to step 8.
Step 4: Did the Flatbed Home Sensor test or Flatbed motor test fail? Yes: Go step 5. No: Go to step 6.
Step 5: Replace the flatbed. Did this solve the problem? Yes: The problem is solved. No: Go to step 6.
Step 6: Did the ADF pick motor or feed motor tests fail? Yes: Go to step 7. No: Go to step 8.
Step 7: Replace the ADF. Did this fix the problem? Yes: The problem is solved. No: Go to step 8.
Step 8: Replace the controller board. Did this fix the problem? Yes: The problem is solved. No: Contact the next level of support.

Code: 849.01

Description: Configuration error - the device had modem installed, but configID indicates it should not.
Remedy: Contact the next level of support. They will give the instructions on how to resolve the error.

Code: 849.10

Description: Configuration error - the device had HD installed, but configID indicates it should not.
Remedy: Contact the next level of support. They will give the instructions on how to resolve the error.

Code: 900.xx

Description: Controller firmware errors
Remedy:

Code: 912.xx

Description: Unrecoverable Engine firmware error POR the machine. If the error re-occurs, then update the firmware. If the error remians, then replace the controller board.
Remedy:

Code: 940.xx

Description: Controller to engine communication failure - the zero crossing signal used for fuser control in the low voltage (LV) power supply has failed, or the wrong low voltage power supply has been installed.
Remedy: Step 1: 1. Check the power cord for continuity. If necessary, replace. 2. Make sure the nominal voltage source is within specification. Does the problem remain? Yes: Go to step 2. No: The problem is solved.
Step 2: Check if the power supply cable is properly connected to the controller board. Is it properly connected? Yes: Go to step 3. No: Reseat the cables.
Step 3: 1. Turn off the printer. 2. Remove the power cord. 3. Measure the resistance between terminals A and D of the power supply socket. Is the resistance approximately 30 ohms? Yes: Contact your next level of support. No: Replace the power supply.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie