Code :

Code: C073
Description: Finisher not connected
Connection status error for the finisher FS-529 is occurred.
Remedy: 1 Check the connection status of the finisher FS-529, and modify as necessary. 2 Change FSCB. 3 Change PRCB.

Code: C075
Description: Large Paper Size Kit error
The installed large paper size kit is not compatible with the marketing area for which the MFP board is destined.
Remedy: 1 Install the large paper size kit appropriate for the marketing area. 2 Change MFPB.

Code: C076
Description: Copy Kit Counter error
The current count value of the copy kit counter reaches the setting configured in [Max. Allowance Set].
Remedy: 1 Increase the setting configured in [Max. Allowance Set] and turn the power switch OFF and ON. I.10.6 Copy Kit Counter 2 If the copy kit counter is not used, change the copy kit counter count setting to mode 1 and then turn the power switch OFF and ON. I.10.5 Copy Kit Counter Count 3 Change MFPB.

Code: FFFF
Description: Interface communication error
Correct communication is failed when receiving/sending the command between PRCB and MFPB.
Remedy: 1 Reboot the main unit. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary 4 Change connecting cable between MFPB and PRCB. 5 Change PRCB. 6 Change MFPB.