• Code: CD110
• Description: Wireless LAN destination initialization error. When an initialization error occurred on the settings of the wireless LAN in the upgrade kit (UK-212).
• Causes:
• Remedy: 1. Check the UK-212 connector for proper connection and correct as necessary. 2. Rewrite the firmware. 3. Reinstall the UK-212.

• Code: CD201, CD202, CD203
• Description: • CD201: File memory mounting error • CD202: Memory capacity discrepancy • CD203: Memory capacity discrepancy 2 CD201: • The file memory is not mounted. • The file has any abnormality. CD202: • File memory capacity on the MFP board (MFPB) is not enough. • File memory capacity necessary for duplex printing is not enough. CD203: • File memory capacity on the MFP board (MFPB) is not enough.
• Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
• Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Replace the DIMM. 3. Replace MFPB.

• Code: CD211, CD212
• Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware related to the BTC compression function of the MFP board (MFPB) fails to respond.
• Causes: MFP board (MFPB)
• Remedy: 1. Replace MFPB.

• Code: CD241, CD242
• Description: • CD241: Encryption ASIC setting error • CD242: Encryption ASIC mounting error • CD241: Initialization error of the encrypted ASIC is detected during the machine is starting. • CD242: The faulty of the installation of encrypted ASIC is detected during the machine is starting.
• Causes: MFP board (MFPB)
• Remedy: 1. Check the MFP board connector for proper connection and correct as necessary. 2. Replace MFPB

• Code: CD261
• Description: USB host board failure. • When a failure is detected in USB board included in the local interface kit. • Non-standard USB device is connected.
• Causes: • MFP board (MFPB) • USB board (EK-608)
• Remedy: 1. Check the operation with another USB device. 2. Check the USB board connector for proper connection and correct as necessary. 3. Replace the USB board. 4. Replace MFPB.

• Code: CD262
• Description: Extension network adapter installation error. • When the 2nd network card settings is set to “Set” but the upgrade kit (UK-212) is not installed. • Upgrade Kit (UK-212) is faulty.
• Causes:
• Remedy: 1. Check the settings of [Service Mode] -> [Network Settings] -> [2nd Network Setting] -> [2nd network card settings]. 2. Check the UK-212 connector for proper connection and correct as necessary. 3. Rewrite the firmware. 4. Reinstall the UK-212.

• Code: CD271
• Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory (DIMM) included in UK-211 is not installed.
• Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
• Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Replace the DIMM. 3. Replace MFPB.

• Code: CD272
• Description: i-Option activated and additional memory and HDD not installed. While the i-Option is activated, the additional memory (DIMM) included in UK-211 and the HDD are not installed.
• Causes: • MFP board (MFPB) • Hard disk (HDD) • DIMM (DIMM: UK-211)
• Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Access [Service Mode] -> [System 2] -> [HDD] and check to see if “Installed” is selected. 3. Replace the DIMM. 4. Replace the hard disk. 5. Replace MFPB.