Description: SD: Folding motor (M10) drive abnormality.
- The folding roller home sensor (PS22) does not turn ON within a specified period of time after M10 turns ON.
Causes: Folding motor (M10) Folding roller home sensor (PS22) SD control board (SDCB)
Description: SD: Conveyance motor (M8) drive abnormality.
- Within a specified period of time after M8 turns ON, the ON of a motor lock signal is detected for a prescribed period of time in succession.
- A specified period of time after M8 turns OFF, the OFF of a motor lock signal is detected for a prescribed period of time in succession.
Causes: Conveyance motor (M8) SD control board (SDCB)
Description: FS-510: Exit roller release motor (M6) drive abnormality.
- When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON.
- When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON.
Causes: Exit roller release motor (M6) Shutter home sensor (PS16) FS control board (FSCB)
Description: FS-510: Alignment motor /Fr (M5) drive abnormality.
- While in the home position search, the alignment home sensor /Fr (PS7) does not turn ON within a specified period of time after M5 turns ON.
- While in the home position search, PS7 does not turn OFF within a specified period of time after M5 turns ON.
Causes: Alignment motor /Fr (M5) Alignment home sensor /Fr (PS7) FS control board (FSCB)
Description: FS-510: Exit paddle solenoid (SD2) drive abnormality.
- While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON.
- While in the paper hold-down operation, PS11 does not turn OFF within a specified period of time after SD turns ON.
Causes: Exit paddle solenoid (SD2) Exit paddle home sensor (PS11) FS control board (FSCB)
Description: FS-511: Punch motor (M11) drive abnormality.
- The punch encoder sensor (PS15) does not turn OFF within a specified period of time after M11 turns ON.
Description: FS-511: Hole punch selector motor (M14) drive abnormality (inch system only)
- When starting the punch 2- hole position switch drive, the hole punch position switch (SW4) is not turned ON in the specified period of time after the M14 is turned ON.
- When starting the punch 3- hole position switch drive, the SW4 is not turned OFF in the specified period of time after the M14 is turned ON.
Causes: FS control board (FSCB) Hole punch selector motor (M14)
Description: PU: Punch motor (M1) drive abnormality.
- The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
Causes: Punch motor (M1) Punch position sensor /1 (PS2) Punch position sensor /2 (PS3) FS control board (FSCB)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.