Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 420 — Trang 8/11

Code: C-3804

Description: Fusing sub sensor low temperature abnormality.
- While in the idle, the fusing heater lamp /2 (L3) turns on for more than 12 seconds in succession.
Causes: Thermistor /2 (TH2) Printer control board (PRCB)

Code: C-3805

Description: Fusing sub sensor low temperature abnormality.
- While in other than the warm-up, the thermistor /2 (TH2) detects a temperature lower than 130 °C for more than 10 seconds.
Causes: Thermistor /2 (TH2) Printer control board (PRCB)

Code: C-3806

Description: Fusing sub sensor low temperature abnormality.
- The detection temperature of the thermistor /2 (TH2) does not get to the prescribed temperature within a specified period of time after it starts the warm-up.
Causes: Thermistor /2 (TH2) Printer control board (PRCB)

Code: C-3807

Description: Fusing main sensor high temperature abnormality (sub CPU detection)
- In the sub CPU, the thermistor /1 (TH1) detects a temperature higher than 236 °C for more than a specified period of time.
Causes: Thermistor /1 (TH1) Printer control board (PRCB)

Code: C-3808

Description: Fusing sub sensor high temperature abnormality (sub CPU detection)
- In the sub CPU, the thermistor /2 (TH2) detects a temperature higher than 236 °C for more than a specified period of time.
Causes: Thermistor /2 (TH2) Printer control board (PRCB)

Code: C-3901

Description: Inferior contact of the thermistor /1 (TH1)
- While in the warm-up condition, when the thermistor /2 (TH2) detection temperature gets to the Ready temperature before the TH1 detection temperature, the TH1 detection temperature does not get to the Ready temperature a specified period of time after the TH2 detection temperature got to the Ready temperature.
Causes: Thermistor /1 (TH1) Printer control board (PRCB)

Code: C-3902

Description: Inferior contact of the thermistor /2 (TH2)
- While in the warm-up condition, when the thermistor /1 (TH1) detection temperature gets to the Ready temperature before the TH2 detection temperature, the TH2 detection temperature does not get to the Ready temperature a specified period of time after the TH1 detection temperature got to the Ready temperature
Causes: Thermistor /2 (TH2) Printer control board (PRCB)

Code: C-3903

Description: Thermistor /1 (TH1) open abnormality (sub CPU detection)
- In the sub CPU, the TH1 detection temperature detects a temperature between -8 and 20 °C for more than a specified period of time.
Causes: Thermistor /1 (TH1) Printer control board (PRCB)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie