Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 552 — Trang 23/25

Code: CD203

Description: Memory capacity discrepancy 2 • File memory capacity on the printer control board (PRCB) is not enough.
Causes: MFP board (MFPB)
Remedy: 1 Check to see if the memory on MFPB is installed correctly. 2 Change the memory on MFPB. 3 Change MFPB.

Code: CD211

Description: PCI-SDRAM DMA operation failure • Hardware related to the transfer of memory image of the printer control board (PRCB) fails to respond.
Causes: MFP board (MFPB)
Remedy: 1 Change MFPB.

Code: CD212

Description: Compression/extraction timeout detection • Hardware related to the BTC compression function of the printer control board (PRCB) fails to respond.
Causes: MFP board (MFPB)
Remedy: 1 Change MFPB.

Code: CD231

Description: No Fax memory at FAX board mounting • The DIMM for FAX is not mounted during the FAX board is mounting. • The FAX board is not mounted when the FAX board mounting is set ON at Service Mode.
Causes: MFP board (MFPB)
Remedy: 1 Check to see if the FAX board is installed correctly. 2 Change PRCB.

Code: CD241

Description: Encryption ASIC error • Initialization error of the encrypted ASIC is detected during the machine is starting.
Causes: MFP board (MFPB)
Remedy: 1 Check the MFP board connector for proper connection and correct as necessary. 2 Change MFPB

Code: CD242

Description: Encryption ASIC mounting error • The faulty of the installation of encrypted ASIC is detected during the machine is starting.
Causes: MFP board (MFPB)
Remedy: 1 Check the MFP board connector for proper connection and correct as necessary. 2 Change MFPB

Code: CD261

Description: USB host board failure • When a failure is detected in USB host board included in the local interface kit. • Non-standard USB device is connected.
Causes: MFP board (MFPB) USB host board (EK-604)
Remedy: 1 Check the operation with another USB device. 2 Check the USB host board connector for proper connection and correct as necessary. 3 Change USB host board. 4 Change MFPB.

Code: CD271

Description: i-Option activated and additional memory not installed • While the i-Option is activated, the additional memory included in UK-203 is not installed.
Causes: MFP board (MFPB) Memory for i-Option (UK-203)
Remedy: 1 Check the memory (UK-203) for proper connection and correct as necessary. 2 Change memory (UK-203). 3 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie