Description: Compression/extraction timeout detection Hardware related to the BTC compression function of the printer control board (PRCB) fails to respond.
Description: USB host board failure • When a failure is detected in USB host board included in the local interface kit. • Non-standard USB device is connected.
Causes: • MFP board (MFPB) • USB host board (EK-604)
Remedy: 1 Check the operation with another USB device. 2 Check the USB host board connector for proper connection and correct as necessary. 3 Replace the USB host board. 4 Replace MFPB.
Description: i-Option activated and additional memory not installed While the i-Option is activated, the additional memory included in UK-204 is not installed.
Description: i-Option activated and additional memory and HDD not installed While the i-Option is activated, the additional memory included in UK-204 and the hard disk are not installed.
Causes: • MFP board (MFPB) • Hard disk • Memory board/2 (MEMB/2; UK-204)
Remedy: 1 Check MEMB/2 for proper connection and correct as necessary. 2 Access [Service Mode] -> [System 2] -> [HDD] and check to see if “Installed” is selected. 3 Replace MEMB/2 4 Replace the hard disk 5 Replace MFPB