Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C287 — Trang 3/31

Code: 20-21

Description: <When PC-114 or PC-214 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON (unblocked) even after the lapse of a given period of time after the tray 3 vertical transport sensor (PS113) is turned ON by a paper. <When PC-414 is installed> The tray 2 vertical transport sensor (PS19) is not turned ON (unblocked) even after the lapse of a given period of time after the LCT vertical transport sensor (PS133) is turned ON by a paper.
Causes: <When PC-114 or PC-214 is installed> • Transport motor (M1) • Tray 3 vertical transport motor (M112) • Tray 2 vertical transport clutch (CL2) • Tray 2 vertical transport sensor (PS19) • Tray 3 vertical transport sensor (PS113) • MFP board (MFPB) • PC control board (PCCB) <When PC-414 is installed> • Transport motor (M1) • Vertical transport motor (M132) • Tray 2 vertical transport clutch (CL2) • Tray 2 vertical transport sensor (PS19) • LCT vertical transport sensor (PS133) • MFP board (MFPB) • PC control board (PCCB)
Remedy:

Code: 20-22

Description: The tray 3 vertical transport sensor (PS113) is not turned ON even after the lapse of a given period of time after the tray 4 vertical transport sensor (PS123) has been blocked by a paper.
Causes: • Tray 3 vertical transport motor (M112) • Tray 4 vertical transport motor (M122) • Tray 3 vertical transport sensor (PS113) • Tray 4 vertical transport sensor (PS123) • PC control board (PCCB)
Remedy:

Code: 30-03

Description: The leading edge of paper is not turned ON (unblocked) the paper exit sensor (PS3) even after the lapse of a given period of time after the paper feeding is started.
Causes: • Transport motor (M1) • Registration clutch (CL4) • Registration sensor (PS1) • Paper exit sensor (PS3)
Remedy:

Code: 32-01

Description: The ADU paper passage sensor (PS41) is not turned ON (blocked) even after the lapse of a given period of time after the reverse sequence is started.
Causes: • Transport motor (M1) • Paper exit/reverse motor (M4) • ADU transport motor (M5) • Paper exit sensor (PS3) • ADU paper passage sensor (PS41) • Gate switch solenoid (SD3) • MFP board (MFPB)
Remedy:

Code: 32-05

Description: The paper exit sensor (PS3) is not turned OFF (blocked) even after the lapse of a given period of time after the paper has turned ON (unblocked) PS3.
Causes: • Transport motor (M1) • Paper exit/reverse motor (M4) • ADU transport motor (M5) • Paper exit sensor (PS3) • ADU paper passage sensor (PS41) • Gate switch solenoid (SD3) • MFP board (MFPB)
Remedy:

Code: 66-01

Description: The original registration sensor (PS3) is not turned ON (unblocked) after the lapse of a given time after the switchback registration operation started.
Causes: • Original reading motor (M1) • Registration motor (M3) • Original registration sensor (PS3) • Original reading sensor (PS4) • Original exit roller release solenoid (SD1) • DF control board (DFCB)
Remedy:

Code: 66-02

Description: The after separate sensor (PS2) is not turned ON (blocked) after a lapse of a given time after the original feed motor (M2) is turned ON.
Causes: • Original feed motor (M2) • After separate sensor (PS2) • Original length size sensor/1 (PS6) • Original length size sensor/2 (PS7) • Original width size sensor (VR1) • DF control board (DFCB)
Remedy:

Code: 66-03

Description: The after separate sensor (PS2) is not turned OFF (unblocked) after a lapse of a given time after PS2 is turned ON (blocked).
Causes: • Original reading motor (M1) • Original feed motor (M2) • Registration motor (M3) • After separate sensor (PS2) • Original registration sensor (PS3) • Original reading sensor (PS4) • DF control board (DFCB)
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie