• Code: CD050
• Description: Hard disk recovery timeout. The hard disk fails to recover from the power save mode within the predetermined period of time.
• Causes: • MFP board (MFPB) • Hard disk (HDD)
• Remedy: 1. Check the connector between the hard disk-SATAB PJ2 for proper connection and correct as necessary. 2. Check the connector between SATAB PJ1-MFPB CN1 for proper connection and correct as necessary. 3. Reinstall the hard disk. 4. Format the hard disk. 5. Replace the hard disk.

• Code: CD110
• Description: Wireless LAN destination initialization error. When an initialization error occurred on the settings of the wireless LAN in the upgrade kit (UK-212).
• Causes:
• Remedy: 1. Check the UK-212 connector for proper connection and correct as necessary. 2. Rewrite the firmware. 3. Reinstall the UK-212.

• Code: CD201, CD202, CD203
• Description: • CD201: File memory mounting error • CD202: Memory capacity discrepancy • CD203: Memory capacity discrepancy 2
• Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
• Remedy: 1. Check to see if DIMM on MFPB is installed correctly. 2. Replace DIMM on MFPB. 3. Replace MFPB.

• Code: CD211, CD212
• Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection
• Causes: MFP board (MFPB)
• Remedy: 1. Replace MFPB.

• Code: CD241, CD242
• Description: CD241: Encryption ASIC setting error CD242: Encryption ASIC mounting error CD241: Initialization error of the encrypted ASIC is detected during the machine is starting. CD242: The faulty of the installation of encrypted ASIC is detected during the machine is starting.
• Causes: MFP board (MFPB)
• Remedy: 1. Check the MFP board connector for proper connection and correct as necessary. 2. Replace MFPB

• Code: CD261
• Description: USB board failure. • When a failure is detected in USB board included in the local interface kit. • Non-standard USB device is connected.
• Causes: • MFP board (MFPB) • USB board (USBB: EK-608) • USB board (USBB: EK-609)
• Remedy: 1. Check the operation with another USB device. 2. Check USBB connector for proper connection and correct as necessary. 3. Replace USBB. 4. Replace MFPB.

• Code: CD262
• Description: Extension network adapter installation error. • When the 2nd network card settings is set to “Set” but the upgrade kit (UK-212) is not installed. • Upgrade Kit (UK-212) is faulty.
• Causes:
• Remedy: 1. Check the settings of [Service Mode] -> [Network Settings] -> [2nd Network Setting] -> [2nd network card settings]. 2. Check the UK-212 connector for proper connection and correct as necessary. 3. Rewrite the firmware. 4. Reinstall the UK-212.

• Code: CD271
• Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory included in UK-211 is not installed.
• Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
• Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Replace the DIMM. 3. Replace MFPB.