• Code: 99-01
• Description: • As a result of a paper size error, the controller transmits a forced stop command to the printer engine and the printer engine is internally processing the size error. • As a result of a paper size error, the controller transmits a forced stop command to the printer engine; but the paper causing the size error cannot be fed out.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body.

• Code: 99-02
• Description: The controller detects a fault in print sequence
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body.

• Code: 99-03
• Description: Image stabilization not completing a job.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body.

• Code: 99-04
• Description: The finisher pre-drive is not completed even with a print start command received.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body. Or, open and close the front door of the finisher.

• Code: 99-05
• Description: Paper is not taken up and fed in even with a print start command received. The job is not started even with a print start command received.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body.

• Code: 99-06
• Description: Finisher internal control processing is not completed even with the job completed.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the finisher.

• Code: 99-07
• Description: The main body does not complete its paper exit operation. Finisher does not complete its paper exit operation.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body. Or, open and close the front door of the finisher.

• Code: 99-08
• Description: The finisher does not accept a print start command.
• Causes:
• Remedy: 1 Initial check items 2 Open and close the front door of the main body. Or, open and close the front door of the finisher.