• Code: 13E3
• Display: FLASH DEVICE
• Description: Flash ROM device fault
  • An erase error occurs during erasing of data in flash ROM.
• Remedy: 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

• Code: 3C00
• Display: EEPROM1
• Description: Trouble related to security
  • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
• Remedy:

• Code: 3C10
• Display: EEPROM2
• Description: Trouble related to security
  • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
• Remedy:

• Code: 3FFB
• Display: FINISHER ROM
• Description: Finisher flash ROM error
  • An error occurs with flash ROM of the optional staple finisher.
• Remedy: 1 Check the FSCB for proper connection and correct as necessary. 2 Change FSCB.

• Code: C002
• Display: RAM ERROR
• Description: RAM error at startup (standard memory)
  • RAM error at standard memory is detected during printer start-up.
• Remedy: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change the standard/expanded memory. 5 Change PRCB.

• Code: C003
• Display: RAM ERROR
• Description: RAM error at startup (expanded memory)
  • RAM error at expanded memory is detected during printer start-up.
• Remedy: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change the standard/expanded memory. 5 Change PRCB.

• Code: C013
• Display: H/W ADDRESS
• Description: MAC address error at startup
  • Invalid MAC address is detected during printer start-up.
• Remedy: 1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Change PRCB.

• Code: C015
• Display: BOOT ROM
• Description: Boot ROM error at startup
  • Boot ROM error is detected during printer startup.
• Remedy: 1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Change PRCB.