Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C3351 — Trang 14/18

Code: CD041 ... CD046

Description: HDD command execution error. The error occurred inside the hard disk.
Causes: Hard disk (HDD)
Remedy: 1. Check the hard disk specifications. 2. Format the hard disk. 3. Replace the hard disk.

Code: CD047 ... CD04B

Description: HDD SCSI library error The error occurred inside the hard disk.
Causes: Hard disk (HDD)
Remedy: 1. Check the hard disk specifications. 2. Format the hard disk. 3. Replace the hard disk.

Code: CD050

Description: Hard disk recovery timeout. The hard disk fails to recover from the power save mode within the predetermined period of time.
Causes: • MFP board (MFPB) • Hard disk (HDD)
Remedy: 1. Check the connector between hard disk-MFPB CN1, CN22 for proper connection and correct as necessary. 2. Reinstall the hard disk. 3. Format the hard disk. 4. Replace the hard disk.

Code: CD110

Description: Wireless LAN destination initialization error. When an initialization error occurred on the settings of the wireless LAN in upgrade kit (UK-216).
Causes:
Remedy: 1. Check UK-216 connector for proper connection and correct as necessary. 2. Update the firmware. 3. Reinstall UK-216.

Code: CD201, CD202, CD203

Description: • CD201: File memory mounting error • CD202: Memory capacity discrepancy • CD203: Memory capacity discrepancy 2. condition CD201: • The file memory is not mounted. • The file has any abnormality. CD202: • File memory capacity on the MFP board (MFPB) is not enough. • File memory capacity necessary for duplex printing is not enough. CD203: File memory capacity on the MFP board (MFPB) is not enough.
Causes: • MFP board (MFPB) • Memory board (MEMB; UK-211)
Remedy: 1. Check to see if MEMB on MFPB is installed correctly. 2. Replace MEMB on MFPB. 3. Replace MFPB.

Code: CD211, CD212

Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection. Trouble detection condition • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware related to the BTC compression function of the MFP board (MFPB) fails to respond.
Causes: MFP board (MFPB)
Remedy: 1. Replace MFPB.

Code: CD241, CD242

Description: • CD241: Encryption ASIC setting error • CD242: Encryption ASIC mounting error. Trouble detection condition • CD241: Initialization error of the encrypted ASIC is detected during the machine is starting. • CD242: The faulty of the installation of encrypted ASIC is detected during the machine is starting.
Causes: MFP board (MFPB)
Remedy: 1. Check the MFP board connector for proper connection and correct as necessary. 2. Replace MFPB.

Code: CD261

Description: USB HUB board failure. • When a failure is detected in USB HUB board included in the local interface kit. • Non-standard USB device is connected.
Causes: • MFP board (MFPB) • USB HUB board/1 (USBHB/1: EK-P05, EK-P06) • USB HUB board/2 (USBHB/2: EK-P05, EK-P06)
Remedy: 1. Check the operation with another USB device. 2. Check the USB HUB board connector for proper connection and correct as necessary. 3. Replace the USB HUB board. 4. Replace MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie