Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C3351 — Trang 13/18

Code: CC302

Description: Authentication customize data version mismatch error. The authentication customize data version is later than the firmware version of the machine.
Causes: • MFP board (MFPB) • Authentication device
Remedy: 1. Rewrite the main body firmware with the latest one and reinstall the authentication customize data. 2. Replace MFPB.

Code: CCC00

Description: Public user account track information error. At the first time of startup, the nonvolatile status is reset incompletely due to any trouble (such as a shut off of the main power).
Causes: eMMC board (eMMC)
Remedy: 1. Replace eMMC. NOTE • Contact Konica Minolta technical support if the eMMC board needs to be replaced.

Code: CD002

Description: JOB RAM save error. The error in save of job data to the memory/ hard disk and its read error are detected.
Causes: • MFP board (MFPB) • Hard disk (HDD)
Remedy: 1. Check the connector between hard disk-MFPB CN1, CN22 for proper connection and correct as necessary. 2. Format the hard disk. 3. Replace the hard disk. 4. Replace MFPB.

Code: CD004, CD00F

Description: • CD004: Hard disk access error (connection failure) Unable to communicate between the hard disk and MFP board (MFPB). • CD00F: Hard disk data transfer error Data transfer from the hard disk is faulty.
Causes: • MFP board (MFPB) • Hard disk (HDD)
Remedy: 1. Check the connector between hard disk-MFPB CN1, CN22 for proper connection and correct as necessary. 2. Reinstall the hard disk. 3. Replace the hard disk. 4. Replace MFPB.

Code: CD010

Description: Hard disk unformat. Unformatted hard disk is connected.
Causes: • MFP board (MFPB) • Hard disk (HDD)
Remedy: 1. Format the hard disk. 2. Replace the hard disk. 3. Replace MFPB.

Code: CD011

Description: Hard disk out of specifications mounted. A hard disk that falls outside the specifications is connected.
Causes: Hard disk
Remedy: 1. Check the hard disk specifications. 2. Replace the hard disk.

Code: CD012

Description: Mount error due to hard disk being unformatted. • The hard disk is not logically formatted after the whole data in the hard disk has been deleted by overwriting. • The hard disk that has replaced an old one is not logically formatted.
Causes: Hard disk
Remedy: 1. Logically format the hard disk and then upgrade the firmware. 2. Replace the hard disk.

Code: CD030

Description: Hard disk management information reading error The machine fails to read administrative information data saved in the hard disk.
Causes: Hard disk (HDD)
Remedy: 1. Check the hard disk specifications. 2. Format the hard disk. 3. Replace the hard disk.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie