• Code: CA051
• Description: Standard controller configuration failure
  • The controller of the printer control board (PRCB) is faulty
• Remedy: 1 Check to see if the following setting has been correctly made: [Service Mode] - [System 2] - [Image Controller Setting]. If changing the setting, turn OFF the main power switch and turn it ON again after 10 seconds or more. 2 Check the connectors of the MFP board (MFPB) for proper connection and correct as necessary. 3 Change MFP.

• Code: CA052
• Description: Controller hardware error
  • A controller hardware error is detected in the network I/F.
• Remedy: 1 Check to see if the following setting has been correctly made: [Service Mode] - [System 2] - [Image Controller Setting]. If changing the setting, turn OFF the main power switch and turn it ON again after 10 seconds or more. 2 Check the connectors of the MFP board (MFPB) for proper connection and correct as necessary. 3 Change MFP.

• Code: CA053
• Description: Controller start failure
  • A controller start failure is detected in the controller interface.
• Remedy: 1 Check to see if the following setting has been correctly made: [Service Mode] - [System 2] - [Image Controller Setting]. If changing the setting, turn OFF the main power switch and turn it ON again after 10 seconds or more. 2 Check the connectors of the MFP board (MFPB) for proper connection and correct as necessary. 3 Change MFP.

• Code: CB001
• Description: FAX board error 1
• Remedy:

• Code: CB002
• Description: FAX board error 2
• Remedy:

• Code: CB003
• Description: FAX board error 3
• Remedy:

• Code: CB051
• Description: FAX board mount failure line 1
• Remedy:

• Code: CB052
• Description: FAX board mount failure line 2
• Remedy: