Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C3851 — Trang 18/18

Code: CEEE1, CEEE3

Description: • CEEE1: MFP board (MSC) malfunction • CEEE3: MFP board (ENG) malfunction. Trouble detection condition MFP board (MFPB) is faulty.
Causes: MFP board (MFPB)
Remedy: 1. Check the connectors on MFPB for proper connection and correct as necessary. 2. Replace MFPB.

Code: CEEE2

Description: Scanner section malfunction. A scanner part is faulty.
Causes:
Remedy: 1. Replace the scanner unit.

Code: CFB00 ... CFF2D

Description: Abort code
Causes: MFP board (MFPB)
Remedy: 1 Power switch Turn OFF and ON the power switch, and check if the Abort code appears again. NO When not reappearing, continuous use is carried out, and it is checked whether an abort code occurs. 2 Connector connection Check the connector for proper connection on MFPB and correct as necessary. NO It will correct, if connector connection has abnormalities. 3 Firmware Update the firmware to the latest version, and check if the Abort code appears again. NO After conducting firmware updating, check the firmware version No. and confirm that the firmware has been normally updated. 4 MFP board Replace MFPB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie