Code :

Code: CB110
Description: FAX driver error: Instance generation error or observer registration error
Remedy:

Code: CC140
Description: Trouble related to security
Remedy: Contact the responsible people of KM before taking some countermeasures.

Code: CC151, CC152
Description: ROM contents error upon startup (MSC) Trouble code ROM contents error upon startup (scanner) A fault is detected in a sequence of ROM contents check of the MFPB during starting.
Remedy: 1 Check the ROM version. - - 2 Rewrite the firmware. - - 3 Replace the appropriate board. MSC: MFP board (MFPB) IR: MFP board (MFPB)

Code: CC155
Description: Finisher ROM error Data of flash ROM of the finishing options is determined to be faulty when the main power swicth is turned ON.
Remedy:
When FS-533, FS-534 or FS-535 is installed: 1 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Replace FSCB (FS-533/FS-534/FS-535).

When JS-506 is installed: 1 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Replace JSCB

Code: CC156
Description: DF ROM error. Upgrade of the firmware has not been successful.
Remedy: 1 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Replace DFCB

Code: CC157
Description: Finisher ROM error (RU). When a communication error is detected between the main body and the horizontal transport unit.
Remedy: 1 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Replace RUCB - - 4 Replace FSCB

Code: CC158
Description: Finisher ROM error (ZU). Data of flash ROM of the z-folding unit is determined to be faulty when the power is turned ON.
Remedy: 1 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Replace ZUCB

Code: CC159, CC15A
Description: ROM contents error upon startup (DSC1), ROM contents error upon startup (DSC2)
Remedy: • DSC board/1 (DSCB/1; SC-508) • DSC board/2 (DSCB/2; SC-508) 1 Check DSCB/1 or DSCB/2 connector for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch. - - 3 Rewrite the firmware. - - 4 Replace DSCB/1 or DSCB/2