Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C652 — Trang 21/28

Code: C6753

Description: ASIC clock input error (back side)
• When starting the scanner, verification on reading and writing the predetermined value for image processing ASIC on CCD board was conducted, and verification failure was detected.
Causes: Exposure unit CCD board (CCDB) MFP board (MFPB)
Remedy: 1 Correct the harness connection of CCDB if faulty. - - 2 Change CCDB - - 3 Change MFPB

Code: C6754

Description: CIS clamp adjustment failure
• After the gain adjustment is performed at the start-up, the CIS clamp adjustment value is too high or too low.
Causes: CIS module (CIS) DS image processing board (DSIPB) CIS inverter board (CINVB) CIS power supply (CISPU) MFP board (MFPB)
Remedy: 1 Correct the harness connection between CIS and DSIPB if faulty. - - 2 Correct the harness connection between CIS and CINVB if faulty. - - 3 Correct the harness connection between CIS and CISPU if faulty. - - 4 Check for possible extraneous light and correct as necessary. - - 5 Clean the back side reading glass and the shading sheet if dirty. - - 6 Change CIS - - 7 Change DSIPB - - 8 Change CINVB - - 9 Change CISPU - - 10 Change MFPB

Code: C6755

Description: CIS gain adjustment failure
• After the gain adjustment is performed at the start-up, the peak value of the output data is lower than a given value.
Causes: CIS module (CIS) DS image processing board (DSIPB) CIS inverter board (CINVB) CIS power supply (CISPU) MFP board (MFPB)
Remedy: 1 Correct the harness connection between CIS and DSIPB if faulty. - - 2 Correct the harness connection between CIS and CINVB if faulty. - - 3 Correct the harness connection between CIS and CISPU if faulty. - - 4 Check for possible extraneous light and correct as necessary. - - 5 Clean the back side reading glass and the shading sheet if dirty. - - 6 Change CIS - - 7 Change DSIPB - - 8 Change CINVB - - 9 Change CISPU - - 10 Change MFPB

Code: C6901

Description: DSC board mount failure 1
• When MFP detects that DSC board (front side) is not properly installed.
Causes: DSC board (SC-507) MFP board (MFPB)
Remedy: 1 Correct the harness connection of DSC board if faulty. - - 2 Change DSC board - - 3 Change MFPB

Code: C6902, C6903

Description: DSC Bus check NG1
• When DSC bus check (front side) detects an error.
Causes: DSC board (SC-507) MFP board (MFPB)
Remedy: 1 Correct the harness connection of DSC board if faulty. - - 2 Change DSC board - - 3 Change MFPB

Code: C6911

Description: DSC board mount failure 2
• When MFP detects that DSC board (back side) is not properly installed.
Causes: DSC board (SC-507) MFP board (MFPB)
Remedy: 1 Correct the harness connection of DSC board if faulty. - - 2 Change DSC board - - 3 Change MFPB

Code: C6912, C6913

Description: DSC Bus check NG2
• When DSC bus check (back side) detects an error.
Causes: DSC board (SC-507) MFP board (MFPB)
Remedy: 1 Correct the harness connection of DSC board if faulty. - - 2 Change DSC board - - 3 Change MFPB

Code: C6F01

Description: Scanner sequence trouble 1
• The original transport interval becomes shorter than the designed value due to an original transport control error in original reading in ADF.
Causes: MFP board (MFPB) DF control board (DFCB)
Remedy: 1 Correct the harness connection between main body and ADF if faulty. - - 2 Change DFCB - - 3 Change MFPB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie