Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C654 — Trang 13/28

Code: C2653

Description: EEPROM access error (IU Y)
• The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
Causes: • Imaging unit /C • Imaging unit /M • Imaging unit /Y • Printer control board (PRCB)
Remedy: 1 Clean the connection between the imaging unit and the machine if dirty. 2 Reinstall the imaging unit. 3 Check the harness for proper connection and correct as necessary. 4 Replace the imaging unit. 5 Replace PRCB.

Code: C2A14

Description: Drum unit/K new release failure
The status with the new unit is not cleared after the new drum unit/K is set.
Causes: • Drum unit/K • Printer control board (PRCB)
Remedy: 1 Clean the connection between the drum unit and the machine if dirty. 2 Reinstall the drum unit. 3 Check the harness for proper connection and correct as necessary. 4 Replace the drum unit. 5 Replace PRCB.

Code: C2A21

Description: Toner cartridge/C new release failure
The status with the new cartridge is not cleared after the new toner cartridge is set.
Causes: • Toner cartridge/C • Toner cartridge/M • Toner cartridge/Y • Toner cartridge/K • Printer control board (PRCB)
Remedy: 1 Clean the connection between the toner cartridge and the machine if dirty. 2 Reinstall the toner cartridge. 3 Check the harness for proper connection and correct as necessary. 4 Replace the toner cartridge. 5 Replace PRCB.

Code: C2A22

Description: Toner cartridge/M new release failure
The status with the new cartridge is not cleared after the new toner cartridge is set.
Causes: • Toner cartridge/C • Toner cartridge/M • Toner cartridge/Y • Toner cartridge/K • Printer control board (PRCB)
Remedy: 1 Clean the connection between the toner cartridge and the machine if dirty. 2 Reinstall the toner cartridge. 3 Check the harness for proper connection and correct as necessary. 4 Replace the toner cartridge. 5 Replace PRCB.

Code: C2A23

Description: Toner cartridge/Y new release failure
The status with the new cartridge is not cleared after the new toner cartridge is set.
Causes: • Toner cartridge/C • Toner cartridge/M • Toner cartridge/Y • Toner cartridge/K • Printer control board (PRCB)
Remedy: 1 Clean the connection between the toner cartridge and the machine if dirty. 2 Reinstall the toner cartridge. 3 Check the harness for proper connection and correct as necessary. 4 Replace the toner cartridge. 5 Replace PRCB.

Code: C2A24

Description: Toner cartridge/K new release failure
The status with the new cartridge is not cleared after the new toner cartridge is set.
Causes: • Toner cartridge/C • Toner cartridge/M • Toner cartridge/Y • Toner cartridge/K • Printer control board (PRCB)
Remedy: 1 Clean the connection between the toner cartridge and the machine if dirty. 2 Reinstall the toner cartridge. 3 Check the harness for proper connection and correct as necessary. 4 Replace the toner cartridge. 5 Replace PRCB.

Code: C3101

Description: Fusing pressure roller separation failure
• The fusing pressure home sensor (PS55) is not turned OFF (retracted state) even after the set period of time after the fusing pressure roller retraction operation is started. • The fusing pressure home sensor (PS55) is not OFF (retracted state) when the fusing pressure roller retraction operation is completed. • The fusing pressure home sensor (PS55) is not turned ON (pressed state) after the set period of time after the fusing pressure roller pressure operation is started. • The fusing pressure home sensor (PS55) is not ON (pressed state) when the fusing pressure roller pressure operation is completed.
Causes: • Fusing pressure home sensor (PS55) • Fusing pressure motor (M29) • Printer control board (PRCB) • Fusing unit
Remedy: 1 Check the connector between M29-PRCB CN29 for proper connection and correct as necessary. 2 Check the connector of M29 for proper drive coupling and correct as necessary. 3 Check the connector between PS55-PRCB CN17 for proper connection and correct as necessary. 4 PS55 I/O check, sensor check. 5 M29 operation check PRCB CN29-1 to 4 8-H. 6 Replace M29. 7 Replace the fusing unit. 8 PFTDB ICP15 or ICP25 conduction check. 9 Replace PRCB.

Code: C3102

Description: Heating roller assy failure to turn
During any state other than printing operation , the hard latch signal from one or both of the heating roller rotation latch detection 1 and the heating roller rotation latch detection 2 is turned ON.
Causes: • Heating roller rotation sensor (PS56) • Fusing motor (M30) • Printer control board (PRCB) • Fusing unit
Remedy: 1 Check the fusing unit for proper installation and correct as necessary. 2 Check the connector between M30-PRCB CN30 for proper connection and correct as necessary. 3 Check the connector of M30 for proper drive coupling and correct as necessary. 4 PS56 I/O check, sensor check. 5 M30 operation check PRCB CN30-4 (REM) PRCB CN30-7 (LOCK) 4-K. 6 PRCB ICP15 conduction check. 7 Replace M30. 8 Replace the fusing unit. 9 Replace PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie