• Code: SC60-11
• Description: When the main power switch (SW1) is ON, a region into which no write was made by the IWS is detected in the DF control program.
• Causes: RADF control board (ADFCB) RADF program
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-01
• Description: Original registration sensor /Rt (PS306) abnormality.
• Causes: Original registration sensor / Rt (PS306)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-02
• Description: Original conveyance sensor (PS308) abnormality.
• Causes: Original conveyance sensor (PS308)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-03
• Description: Original reverse sensor (PS309) abnormality.
• Causes: Original reverse sensor (PS309)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-04
• Description: Non-volatile memory error
• Causes: RADF control board (ADFCB)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-05
• Description: Cooling fan /Lt (FM301) abnormality.
• Causes: Cooling fan /Lt (FM301)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-06
• Description: Original reverse sensor (PS309) abnormality.
• Causes: Original reverse sensor (PS309)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-07
• Description: Original reverse/exit sensor (PS313) abnormality.
• Causes: Original reverse/exit sensor (PS313)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).