Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1050e — Trang 37/42

Code: SC76-37

Description: An error detection signal is detected for a specified period of time in succession while the paper cooling fan motor /Fr (FM1) of the tandem (2nd) LS is ON.
Causes: Paper cooling fan motor /Fr (FM1) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC76-38

Description: An error detection signal is detected for a specified period of time in succession while the paper cooling fan motor /1, /2 (FM2, FM6) of the tandem (2nd) LS is ON.
Causes: Paper cooling fan motor /1, /2 (FM2, FM6) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC76-39

Description: An error detection signal is detected for a specified period of time in succession while the paper cooling fan motor /Mi (FM3) of the tandem (2nd) LS is ON.
Causes: Paper cooling fan motor /Mi (FM3) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC76-40

Description: An error detection signal is detected for a specified period of time in succession while the motor cooling fan motor (FM4) of the tandem (2nd) LS is ON.
Causes: Motor cooling fan motor (FM4) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC76-41

Description: An error detection signal is detected for a specified period of time in succession while the paper cooling fan motor /Rr (FM5) of the tandem (2nd) LS is ON.
Causes: Paper cooling fan motor /Rr (FM5) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC77-01

Description: The conveyance motor (M1) operates for more than the allowed time at a speed out of the specified one.
Causes: FNS control board (FNSCB) FNS drive board (FNSDB) Conveyance motor (M1)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC77-02

Description: The tray up down motor (M3) does not turn OFF even when a specified period of time elapses after it starts operations. Or, it operates for more than the allowed time at a speed out of the specified one.
Causes: FNS control board (FNSCB) FNS drive board (FNSDB) Tray up down motor (M3) Tray upper limit sensor (PS2) Tray lower limit sensor (PS3)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC77-03

Description: The alignment home sensors /Rr (PS8) and /Fr (PS31) do not turn ON within a specified period of time after the home position search operation of the alignment motors /Rr (M5) and /Fr (M22) starts.
Causes: FNS control board (FNSCB) FNS drive board (FNSDB) Alignment motor /Rr (M5) Alignment motor /Fr (M22) Alignment home sensor /Rr (PS8) Alignment home sensor /Fr (PS31)
Remedy: The main body stops immediately to turn OFF the RL1 (main).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie