Code :

Code: C-C116
Description: ISW write abnormality on PB. The firmware is not written on PB or an error is detected during the ROM check.
Causes: IC board (ICB) PCI relay board (PCIRB) Overall control board (OACB)
Remedy: 1 Check to see that the jumper connector is properly set in the manner that is explained in FIRMWARE VERSION UP in the MAINTENANCE, and reinstall it if any abnormality. - 2 Check the connector connection and the wiring between the main body and each option, and repair it if any abnormality. - 3 Check the I/F connector connection and the wiring for ISW on ICB, and repair it if any abnormality. 21-C 4 Check the connector connection and the wiring between ICB and OACB, and repair it if any abnormality. - 5 Reinstall the firmware of the option corresponds to the malfunction code. - 6 Replace OACB.

Code: C-C117
Description: ISW write abnormality on GP. The firmware is not written on GP, or an error is detected during the ROM check.
Causes: IC board (ICB) PCI relay board (PCIRB) Overall control board (OACB)
Remedy: 1 Check to see that the jumper connector is properly set in the manner that is explained in FIRMWARE VERSION UP in the MAINTENANCE, and reinstall it if any abnormality. - 2 Check the connector connection and the wiring between the main body and each option, and repair it if any abnormality. - 3 Check the I/F connector connection and the wiring for ISW on ICB, and repair it if any abnormality. 21-C 4 Check the connector connection and the wiring between ICB and OACB, and repair it if any abnormality. - 5 Reinstall the firmware of the option corresponds to the malfunction code. - 6 Replace OACB.

Code: C-C120
Description: ISW write abnormality on DF. When the main power switch (SW1) is ON, unwritten region by the ISW is detected in the DF control program.
Causes: DF control board (DFCB) Overall control board (OACB)
Remedy: 1 Check the connector connection and the wiring between the main body and DF, and repair it if any abnormality. - 2 Reinstalling DF firmware - 3 Replace DFCB - 4 Replace OACB.

Code: C-C125
Description: ISW write abnormality of controller. The firmware is not written on ICB or an error is detected during the ROM check.
Causes: IC board (ICB)
Remedy: 1 Check the I/F connector connection and the wiring for ISW on ICB, and repair it if any abnormality. - 2 Reinstall the firmware related to the controller. - 3 Replace ICB.

Code: C-D001
Description: HDD/1 (HDD1) initialization abnormality. HDD1 is defective, or the connector is poorly connected.
Causes: Hard disk /1 (HDD1) Overall control board (OACB)
Remedy: 1 Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. - 2 Format HDD1. - 3 Replace HDD1.

Code: C-D002
Description: JOB_RAM storage abnormality. The JOB information cannot be stored on the hard disk /1 (HDD1).
Causes: Hard disk /1 (HDD1) Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 1 Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. 4-D 2 Reinstall the firmware related to the overall control. - 3 Replace HDD1.

Code: C-D003
Description: Hard disk /1 (HDD1) periodic cleaning abnormality. While in a periodical cleaning, opening the rote to hard disk is not succeeded.
Causes: Hard disk /1 (HDD1) Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 1 Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. 4-D 2 Reinstall the firmware related to the overall control. - 3 Replace HDD1.

‹ First < 86 87 88 89 90 91 >