Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1200P — Trang 90/91

Code: C-D004

Description: HDD/1 (HDD1) access defective. HDD1 is defective, or the connector is poorly connected.
Causes: Hard disk /1 (HDD1) Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 1 Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. 4-D 2 Reinstall the firmware related to the overall control. - 3 Replace HDD1.

Code: C-D010

Description: Hard disk /1 (HDD1) overwrite erase execution. HDD overwrite erase is executed.
Causes: Hard disk /1 (HDD1)
Remedy: 1 Format HDD1. - 2 Replace HDD1.

Code: C-E001

Description: Message queue error. The message queue is insufficient or destroyed.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.

Code: C-E002

Description: Message parameter value error. The parameter value is in excess of the permissible limits.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.

Code: C-E003

Description: Source task error. The ID of the task that sends the message queue is undefined.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.

Code: C-E004

Description: Receiving event error. The receiving event of the message is undefined.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.

Code: C-E005

Description: Memory access abnormality.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.

Code: C-E006

Description: Header readout address abnormality.
Causes: Overall control board (OACB)
Remedy: 1 After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. - 2 Reinstall the firmware related to the overall control. - 3 Replace OACB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie