Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 920 — Trang 11/32

Code: SC36-06

Description: Thermistor /4 (TH4) low abnormality detection (hardware). The output voltage of the TH4 is detected as a low temperature (- 6°C or lower) or high temperature (240.5°Cor higher) abnormality in the comparator circuit.
Causes: Printer control board (PRCB) AC drive board (ACDB) Fusing heater lamp /1 (L2) Fusing heater lamp /2 (L3) Fusing heater lamp /3 (L4) Thermistor /1 (TH1) Thermistor /2 (TH2) Thermistor /3 (TH3) Thermistor /4 (TH4)

Code: SC41-01

Description: The scanner home sensor (PS51) does not turn ON within a specified period of time after the home position search is started.
Causes: Scanner drive board (SDB) Scanner motor (M13) Scanner home sensor (PS5) DC power supply /2 (DCPS2) Wiring harness earth fault Loose connection

Code: SC41-02

Description: When the speed of the polygon motor (M17) is being switched, a speed lock signal is not detected within a specified period of time.
Causes: Scanner drive board (SDB) Polygon motor drive board (PMDB) Polygon motor (M17)

Code: SC42-01

Description: The rotation of the scanner cooling fan (FM7) is checked, and 24V power source is also checked. An abnormal condition occurs with the FM7 EM signal a specified period of time after FM7 turns ON. This abnormal condition recurs even a specified period of time after FM7 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected.
Causes: Scanner drive board (SDB) Scanner cooling fan (FM7) DC power supply /2 (DCPS2) Wiring harness earth fault Loose connection

Code: SC42-04

Description: The rotation of the write unit cooling fan /1 (FM5) is checked, and 24V power source is also checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after FM5, the write unit cooling fan /2 (FM8) turns ON. This abnormal condition recurs even a specified period of time after FM5/FM8 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected.
Causes: Write unit cooling fan /1 (FM5) Overall control board (OACB) DC power supply /2 (DCPS2) AC drive board (ACDB) Wiring harness earth fault

Code: SC42-05

Description: The blowout of ICP for the write unit cooling fan /1 (FM5) in the AC drive board (ACDB) is checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after FM5, the write unit cooling fan /2 (FM8) turns ON. This abnormal condition recurs even a specified period of time after FM5/FM8 is turned OFF and then turned ON, and an error detection signal (blowout of ICP) is detected.
Causes: Write unit cooling fan /1 (FM5) Overall control board (OACB) DC power supply /2 (DCPS2) AC drive board (ACDB) Wiring harness earth fault

Code: SC42-06

Description: The rotation of the write unit cooling fan /1 (FM5) is checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after FM5 and write unit cooling fan /2 (FM8) turns ON. This abnormal condition recurs even a specified period of time after FM5/FM8 is turned OFF and then turned ON, and an error detection signal (24V cut off/blowout of ICP) is not detected.
Causes: Write unit cooling fan /1 (FM5) Write unit cooling fan /2 (FM8) AC drive board (ACDB) Wiring harness earth fault Loose connection

Code: SC42-07

Description: When the print is started, an error detection signal of the writing section cooling fan /1 (FM5) is detected.
Causes: Write unit cooling fan /1 (FM5) Write unit cooling fan /2 (FM8) AC drive board (ACDB) Wiring harness earth fault Loose connection
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie