Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 951 — Trang 40/94

Code: C-1127

Description: The punch shift home sensor (PS303) does not turn ON within a specified period of time after the punch shift motor (M302) turns ON.
Causes: • FNS control board (FNSCB) • Punch drive board (PDB) • Punch shift motor (M302) • Punch shift home sensor (PS303) DIPSW35-2
Remedy: 1. Check the punch kit, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between FNSCB and PDB and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PK:7-B) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 6. Replace M302. 7. Replace PS303. 8. Replace PDB. 9. Replace FNSCB.

Code: C-1130

Description: 1st folding stopper home sensor (PS603) does not turned ON within a specified period of time after the 1st folding stopper motor (M602) starts the home position search operation.
Causes: • ZU control board (ZUCB) • 1st folding stopper motor (M602) • 1st folding stopper home sensor (PS603) DIPSW47-5
Remedy: 1. Check the connector connection and the wiring between ZUCB and motor/sensor, and repair it if any abnormality. 2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 2-B) 3. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 3-B) 4. Replace PS603. 5. Replace M602. 6. Replace ZUCB.

Code: C-1131

Description: 2nd folding stopper home sensor (PS604) does not turned ON within a specified period of time after the 2nd folding stopper motor (M603) starts the home position search operation.
Causes: • ZU control board (ZUCB) • 2nd folding stopper motor (M603) • 2nd folding stopper home sensor (PS604) DIPSW47-5
Remedy: 1. Check the connector connection and the wiring between ZUCB and motor/sensor, and repair it if any abnormality. 2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 2-B) 3. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 3-B) 4. Replace PS604. 5. Replace M603. 6. Replace ZUCB.

Code: C-1132

Description: The punch home sensor (PS301) does not turn ON within a specified period of time after the punch motor (M301) turns ON.
Causes: • FNS control board (FNSCB) • Punch drive board (PDB) • Punch motor (M301) • Punch HP sensor /1 (PS301) • Punch HP sensor /2 (PS307) DIPSW35-2
Remedy: 1. Check the punch kit, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PDB and motor/sensor, and repair it if any abnormality. 3. Check the connector connection and the wiring between FNSCB and PDB and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PK:5-B) 5. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. 6. Replace M301. 7. Replace PS301 and PS302. 8. Replace PDB. 9. Replace FNSCB.

Code: C-1133

Description: The punch shift home sensor (PS605) does not turn ON even after a specified period of time after the punch shift motor (M605) starts the home position search operation.
Causes: • ZU control board (ZUCB) • Punch shift motor (M605) • Punch shift home sensor (PS605) DIPSW47-5
Remedy: 1. Check the connector connection and the wiring between ZUCB and motor/sensor, and repair it if any abnormality. 2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 1-B) 3. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 4-B) 4. Replace PS605. 5. Replace M605. 6. Replace ZUCB.

Code: C-1134

Description: An error detection signal of FM601 is detected continuously for a specified period of time while the main motor cooling fan (FM601) is ON.
Causes: • ZU control board (ZUCB) • Main motor cooling fan (FM601)
Remedy: 1. Check the connector connection and the wiring between ZUCB and the fan, and repair it if any abnormality. 2. Rotate the fan by I/O or hand, and repair it if any abnormality. (Wiring diagram: ZU-608: 6-B) 3. Replace FM601. 4. Replace ZUCB.

Code: C-1135

Description: After the punch motor (M604) turns ON, M604 does not turn ON within a specified period of time.
Causes: • ZU control board (ZUCB) • Punch motor (M604)
Remedy: 1. Check the connector connection and the wiring between ZUCB and the motor, and repair it if any abnormality 2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 5-B) 3. Replace M604. 4. Replace ZUCB.

Code: C-1136

Description: After the punch switchover motor (M608) turns ON, punch switchover switch (MS601) does not turn ON from OFF, or not turn OFF from ON within a specified period of time.
Causes: • ZU control board (ZUCB) • Punch switchover motor (M608) • Punch switchover switch (MS601) DIPSW47-5
Remedy: 1. Check the connector connection and the wiring between ZUCB and motor/switch, and repair it if any abnormality. 2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: ZU-608: 5-B) 3. Check I/O and the operation of the punch hole switching, and repair/replace it if any ab normality. (Wiring diagram: ZU-608: 5-B) 4. Replace MS601. 5. Replace M608. 6. Replace ZUCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie